charismaTec OG DL 사용자 설명서
8
Right-handedness/Left-handedness Mode
By default the assignment of keys is prepared for right-handedness. In most cases left-handed
persons will like to operate incident light, UV light and torchlight with the thumb. To enable this,
please conduct the following steps:
persons will like to operate incident light, UV light and torchlight with the thumb. To enable this,
please conduct the following steps:
1. Shortly press all 4 buttons simultaneously to activate the test and setup mode
2. Keep the oblique light button held until the test has finished. The green LED will be kept
2. Keep the oblique light button held until the test has finished. The green LED will be kept
on shortly to indicate that the setting has been saved.
3. Now you can use the device with the left hand and can operate the incident light with the
former oblique light button. All other buttons are mirrored similarly.
To reset the device to right-handedness mode, please conduct the steps again but now keep the
original incident light button pressed until the end of the test.
original incident light button pressed until the end of the test.
3. Button Functions and Areas of Operation
Always place the device directly onto the document to be checked and move your eye very close
to the lens to obtain an optimal and distortion-free image.
to the lens to obtain an optimal and distortion-free image.
Incident Light Mode
Incident light with 4 strong LEDs (bright field illumination) allows you to check even the finest
printed details like microtext or nanotext.
printed details like microtext or nanotext.
Use your thumb to press the incident light button with the downward pointing rays to activate
incident light mode.
incident light mode.