Kano Computing Limited 18G2000E 사용자 설명서
KANO-RPI3-VE
User Manual
2017.05
1. Product Introduction
This product design is based on the Raspberry Pi 3 Model B V1.2 board, change USB
hub chip, remove Ethernet function and RJ-45 connector, remove DSI and CSI
connector according to client’s requirements.
hub chip, remove Ethernet function and RJ-45 connector, remove DSI and CSI
connector according to client’s requirements.
2. Platform
Architecture
2.1 Block Diagram and Description
System Block Diagram
System Block Diagram
System Description
Referring to the Raspberry Pi 3 Model B V1.2 board, based on the Broadcom Quad
Core SOC, use 5V/2.5A for system power supply via micro USB, use 1GB LPDDR2 for
synchronous dynamic random access and 19.2MHz crystal for system clock, support
HDMI and Audio output, support Bluetooth BLE4.0 and 802.11 b/g/n WLAN then
communication via chip antenna, use USB2.0 hub to expanded 4 USB2.0 interfaces,
reserved 40pin 2.54mm pin pitch for GPIOs.
2.2 Key Components
Referring to the Raspberry Pi 3 Model B V1.2 board, based on the Broadcom Quad
Core SOC, use 5V/2.5A for system power supply via micro USB, use 1GB LPDDR2 for
synchronous dynamic random access and 19.2MHz crystal for system clock, support
HDMI and Audio output, support Bluetooth BLE4.0 and 802.11 b/g/n WLAN then
communication via chip antenna, use USB2.0 hub to expanded 4 USB2.0 interfaces,
reserved 40pin 2.54mm pin pitch for GPIOs.
2.2 Key Components
Name
Component Model
CPU
BCM2837
DDR2 MEMORY
EDB8132B4PB
WLAN and Bluetooth
BCM43438