ASKA ELECTRONICS CO. LIMITED F3 사용자 설명서
3
2, Basic Buttons Operation
Power on
: Press multifunction button for 2 seconds. Blue LED flashes 2 times. Headset
turn on.
Power off
: Press multifunction button for 3 seconds. Red LED turn off after flashes 2
times. Headset turn off.
Volume adjust
: Each press on 'Volume up' or ' Volume down' buttons, one level voice
volume changes. When volume reaches to Max or Minimum,"Tick" reminding voice
occurs.
occurs.
Play/Pause
: Short press multifunction button, music pause. Press it again, music
continues.
Previous
: Short press 'Previous' button, music turns to previous one.
Next
: Short press 'Next' button, music turns to next one.
Answer Call
: Short press multifunction button to answer the phone call.
End call
: Short press multifunction button, phone call ended.
Reject call
: Press 'Volume up' button for 2 seconds to reject a call.
Transfer call
: During the phone call conversation, press' Volume up 'button for 2
seconds, call switches to mobile phone. Press 'Volume up' button for 2 seconds again, call
switches to headset.
switches to headset.
Last number redial
: in standby status, continuously press headset multifunction button
twice to redial the last number.
Call Mute function
: Press 'Volume down' button for 2 seconds, call mute. Press
'Volume down' button for 2 seconds again, call mute cancel.
Battery Capacity status
: When headset connects to iOS devices, iOS devices show the
headset battery power status on the upper right corner.
Charging
: new headset has enough power for pairing and dialing out for several times.
When in low battery, please charging via USB cable for 2 hours. Red LED keep lighting
during charging, blue LED keep lighting charging finished.
during charging, blue LED keep lighting charging finished.
Reset Mode:
Connect the headset to computer via Micro USB cable. When red LED
light flashes, headset reset finished.
3.5mm music line-in function:
3.5mm music line-in function:
Connect Audio line in cable to 3.5 audio jack for wired
music.
Phone call function cannot be used in this mode
The headset is on status (not connect with mobile phone )
1, connect the 3.5 audio wire to the headset and audio player.
2, you can adjust volume bottom of the headset to reach right volume to listen music.
1, connect the 3.5 audio wire to the headset and audio player.
2, you can adjust volume bottom of the headset to reach right volume to listen music.
3, Pairing (One headset support connecting 2 phone devices )
Pairing with one phone or other device
Make sure the headset is power off.
Press and hold the multifunctional button for 5 seconds to enter into the pairing mode.
Make sure the headset is power off.
Press and hold the multifunctional button for 5 seconds to enter into the pairing mode.