IONX LLC T6XSMIPM 사용자 설명서
IONX Support Center 1-800-621-8442, supportcenter@ionxlive.com
_____________________________________________________________________________________
301614 – T6X Installation Manual
301614 – T6X Installation Manual
Confidential
Revision Date: November 19, 2013
Revision: A
Process Owner: Engineering
Page 2 of 21
1 Warning
These instructions are not designed to imply or replace any operating or safety rules.
It is the responsibility of the installer to understand and follow all company safety practices.
WARNING
In order to comply with hazardous classification, only those items
specifically listed can be used and must be used only as shown.
WARNING
Installation shall be carried out in accordance with the applicable code of
practice by suitably-trained personnel.
WARNING
Repair of this equipment shall be carried out in accordance with the
applicable code of practice.
WARNING
Any machining, drilling, and/or sanding related to the installation of this
system should be pre-approved by the authorized department before work is started.
WARNING
If the equipment is likely to come into contact with aggressive substances,
then it is the responsibility of the user to take suitable precautions that prevent it from being
adversely affected, thus ensuring that the type of protection is not compromised.
adversely affected, thus ensuring that the type of protection is not compromised.
WARNING
RF Device: Unit cannot be painted or coated with any material. Coating can
adverseIy affect the performance of the device. Unit shall be masked appropriately if post
installation coating is required.
installation coating is required.
WARNING
Products contain Lithium Ion batteries. Proper disposal procedures are
required upon end of life conditions. If there is not corporate policy for hazardous waste
disposal, the units should be shipped back to IONX for proper disposal.
disposal, the units should be shipped back to IONX for proper disposal.