Ulterius Technologies LLC FDN40 사용자 설명서
CHAPTER 6: NAT
Configuration User Manual
131
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
NAT Status : Enabled
Maximum Translation Entries : 9000
Start Free Port : 6001
Idle Timeout : 10 seconds
TCP Timeout : 3600 seconds
UDP Timeout : 100 seconds
ICMP Timeout : 30 seconds
Max Threshold for Dropped Packets : 100
To modify NAT setting, nat has to be disabled on all interfaces.
3. To disable nat on an interface:
Enter the Global Configuration mode.
UltOs# configure terminal
Enter the Interface Configuration mode.
UltOs(config)# interface wan 0/1
Disable nat
UltOs(config-if)# interface nat disable
Exit from the Interface Configuration Mode.
UltOs(config-if)# end
4. To view the nat status
UltOs# show ip nat interface
NAT Configuration on the WAN Interface
--------------------------------------
Interface NAT NAPT
--------- ------ -------
wan0/1 Disabled Disabled
6.4.1.2
WEB Configuration
NAT can be enabled / disabled on an interface through WEB interface using
the Interface NAT Settings screen (Navigation - Layer3 Management >
NAT > Interface Settings)
the Interface NAT Settings screen (Navigation - Layer3 Management >
NAT > Interface Settings)