Ulterius Technologies LLC FDN40 사용자 설명서
CHAPTER 15: OSPF
`FDN40ConfigUM/20160505
322
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
15.5.13.12 Configuring Default-information Originate Always
Configuring Default-information Originate Always enables generation of a
default external route into the OSPF routing domain and other parameters
related to that area.
default external route into the OSPF routing domain and other parameters
related to that area.
15.5.13.12.1
CLI Configuration
Execute the following commands to configure Default-information Originate
Always.
Always.
1. Enter the Global Configuration mode in FDN40-1.
UltOs# configure terminal
2. Enable OSPF globally in the switch FDN40-1.
UltOs(config)# router ospf
3. Configure the OSPF router-id.
UltOs(config-router)# router-id 10.10.2.1
4. Enable OSPF over the VLAN interface and associate the interface with an
OSPF area.
OSPF area.
UltOs(config-router)# network 10.4.0.1 area 0.0.0.0
UltOs(config-router)# network 10.10.2.1 area 0.0.0.6
5. Configure the ASBR router status.
UltOs(config-router)#asbr router
6. Configure the generation of a default external route.
UltOs(config-router)# default-information originate always metric 40
Disable generation of a default external route by executing the following
command. UltOs(config-router)# no default-information originate always
Refer Sample Configuration for testing default-information originate always
and redist-config.
15.5.13.12.2
WEB Configuration
O
SPF NSSA can be configured through WEB interface using the
OSPF Basic settings screen. For screenshot, refer section 15.5.2.2
15.5.13.13 Configuring Redist-Config
Configuring redist-config configures the information to be applied to routes
learnt from RTM.
learnt from RTM.
15.5.13.13.1
CLI Configuration
1. Enter the Global Configuration mode in FDN40-1.
UltOs# configure terminal
2. Enable OSPF globally in the switch FDN40-1.
UltOs(config)# router ospf