Ulterius Technologies LLC FDN40 사용자 설명서
CHAPTER 2: SYSTEM FEATURES
Configuration User Manual
47
© Ulterius Technologies, LLC 2016. Confidential & Proprietary.
Screen 2-8: Port Basic Settings
2.2.17 Configuring an Interface as Switch Port/ Router Port
Configuring an interface as Router Port configures the port as a Layer 3
interface.
interface.
2.2.17.1 CLI Configuration
1. Execute the following commands to configure a port as a switch port.
Enter the Global Configuration mode.
UltOs# configure terminal
Enter the Interface Configuration mode for lan 0/1.
UltOs(config)# interface lan 0/1
Shutdown the interface.
UltOs(config-if)# shutdown
Configure the interface as switch port.
UltOs(config-if)# switchport
Bring up the interface.
UltOs(config-if)# no shutdown
Exit from configuration mode.
UltOs(config-if)# end
The specified interface must be shutdown prior to the configuration. "no switchport"
configuration is applicable only in WAN ports.
configuration is applicable only in WAN ports.
2.2.17.2 Web Configuration
Switch Port/ Router Port can be configured through WEB interface using the
Port Basic Settings screen. For screenshot, refer 2.2.16.2.
Port Basic Settings screen. For screenshot, refer 2.2.16.2.