Hangzhou Hikvision Digital Technology Co. Ltd. MP7608HN 사용자 설명서

Network Video Recorder Quick Start Guide

Step 2 Press Enter to pop up dropdown list.

Step 3 Press Up/Down to select an item.

Step 4 Press Enter to select it.

17.3 Troubleshooting

Purpose:

If there is no response after you press any button on the remote, follow the procedure below to
troubleshoot.

Step 1 Go to Menu > Other Settings > Display

Step 2 Click Set of Advanced Settings.

Step 3 Edit device number. The default number is 255.

Step 4 Press DEV on the remote control.

Step 5 Enter the device number.

Step 6 Press ENTER on the remote control.

17.4 Set Areas with Remote Control

Step 1 Click the Area Settings button.

Step 2 Press the Edit key on the remote control and a red block appears on the screen.

Step 3 Press the Direction keys on the remote control to adjust the position of the red block.

Step 4 Press the Enter key on the remote control to save the position of the red block.

Step 5 Press the Direction keys on the remote control to adjust the size of the block.

Step 6 Press the Enter key on the remote control to save the size of the block.

Step 7 Press the Menu key on the remote control to set the detection sensitivity. You can set the

level as 1~6 or off. Click OK to save the settings.

Step 8 You can press the A key on the remote control to clear all the mask areas.

Press the Enter key on the remote control to save the settings and then press Esc key to exit.