Omnitracs LLC IVG2 사용자 설명서
80-JE026-1 Rev. J
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
22
5 IVG Installation
Before you begin the installation, inspect the vehicle to determine an installation location.
DO locate the display where it:
• Can be safely installed on a secured bracket that is robust enough to minimize any
vibration and sustain the weight of the display.
• Has a flat mounting surface that is strong enough to support the mounting hardware.
• Is in the driver’s line-of-sight, easy to touch, but does not block the view of the road or
• Is in the driver’s line-of-sight, easy to touch, but does not block the view of the road or
mirrors.
• Is clear of dash controls and gauges.
• Is not mounted in constant, direct sunlight.
• Does not limit a passenger’s leg room or block access to any other compartments.
• Does not interfere with anyone entering or exiting the vehicle cab.
• Is not likely to impact the driver or passenger in case of an accident or collision.
• Is not mounted in constant, direct sunlight.
• Does not limit a passenger’s leg room or block access to any other compartments.
• Does not interfere with anyone entering or exiting the vehicle cab.
• Is not likely to impact the driver or passenger in case of an accident or collision.
DO NOT locate the display where it:
• Obstructs the driver’s field of vision.
• Distracts the driver from the driving task.
• Interferes with the driver’s operation of controls or shifting.
• Obstructs the area swept by the windshield wipers.
• Blocks the deployment of an airbag.
• Distracts the driver from the driving task.
• Interferes with the driver’s operation of controls or shifting.
• Obstructs the area swept by the windshield wipers.
• Blocks the deployment of an airbag.
WARNING
Do not locate the display unit where it obstructs the driver’s field of vision, distracts the
driver from the driving task, interferes with the driver’s operation of controls or displays, or
creates a safety hazard. Follow all laws and regulations governing the placement of
equipment and mounts.
driver from the driving task, interferes with the driver’s operation of controls or displays, or
creates a safety hazard. Follow all laws and regulations governing the placement of
equipment and mounts.