ROSCO INC CYL-V 사용자 설명서
10
* Time zone :
* Time Zone setting
* Default Setting at : GMT -5:00 EST
* DST (Daylight Saving Time) :
* Setup the DST Function mode:
* Auto: DST will automatically start from 2nd Sunday of 3rd month in every year/
* Auto: DST will automatically start from 2nd Sunday of 3rd month in every year/
and finish by 1st Sunday in Novmeber in same year;
* Manual : DST start/finish by user define
* Default Setting at : ON, AUTO
* Date stamp:
* Put the date/time stamp on the video: ON/OFF;
* Default Setting at : ON
* Vehicle Number Stamp:
* Put the vehicle number ID stamp on the video: ON/OFF;
* Default Setting at : ON
* Speed stamp:
* Watermark with GPS value/ Speed: ON/OFF;
* Default Setting at : ON
* Speed Limit Event :
* File will become Event when over this speed. The range from 0 to 255 MPH,
* Default Setting at : OFF, 60MPH
* Vehicle Number:
* Valid character : Space, 0-9, A-Z.
* 9 Characters available, default with empty space
* Must be ensure there are 9 characters (can using space if there are empty space),
* 9 Characters available, default with empty space
* Must be ensure there are 9 characters (can using space if there are empty space),
in order to ensure system stable this car number must be keep as 9 characters (system
will hang up if this parameter less than 9 characters)
will hang up if this parameter less than 9 characters)
FCC Requirement
You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void
your authority to operate the equipment.
You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void
your authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum
distance of 20 centimeters between the radiator and your body.
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum
distance of 20 centimeters between the radiator and your body.