Tesla Motors Inc 1089773E 사용자 설명서

Using seat belts and child safety seats is the
most effective way to protect occupants if a

collision occurs. Therefore, wearing a seat belt
is required by law in most jurisdictions.
Both the driver and passenger seats are
equipped with three-point inertia reel seat
belts. Inertia reel belts are automatically

tensioned to allow occupants to move
comfortably during normal driving conditions.

To securely hold child safety seats, all
passenger seating positions are equipped with
an automatic locking retractor (ALR) that, by
pulling the seat belt beyond the length
needed for a typical adult occupant, locks the
belt into place until the seat belt is unbuckled
(see 

on page 25).

The seat belt reel automatically locks to
prevent movement of occupants if Model 3
experiences a force associated with hard
acceleration, braking, cornering, or an impact

in a collision.

The seat belt reminder on the
touchscreen alerts you if a seat belt

for an occupied seat is not fastened.
If the belt remains unfastened, the
reminder flashes and an intermittent

chime sounds. If all occupants are
buckled up and the reminder stays
on, re-fasten seat belts to ensure
they are correctly latched. Also
remove any heavy objects (such as a
briefcase) from an unoccupied seat.
If the reminder light continues to
stay on, contact Tesla.

Ensure correct positioning of the seat.

2. Draw the belt out smoothly, ensuring the

belt lays flat across the pelvis, chest and

mid-point of your collar bone, between
the neck and shoulder.

3. Insert the latch plate into the buckle and

press together until you hear a click
indicating it is locked in place.

4. Pull the belt to check that it is securely

fastened.

5. Pull the diagonal part of the belt toward

the reel to remove excess slack.

To Adjust the Shoulder Anchor Height
Model 3 is equipped with an adjustable
shoulder anchor for each front seat to ensure

that the seat belt is positioned correctly. The
seat belt should lay flat across the mid-point
of your collar bone while in the correct driving

position. Adjust the height of the shoulder

anchor if the seat belt is not positioned
correctly:
1.

Press and hold the button on the shoulder
anchor to release the locking mechanism.

2. While holding the button, move the

shoulder anchor up or down as necessary
so that the seat belt is positioned
correctly.

3. Release the button on the shoulder

anchor so that it locks into position.

4. Without pressing the button, pull on the

seat belt webbing and attempt to move

the shoulder anchor downwards to check
that it is locked into position.

20

Model 3 Owner's Manual

DRAFT 

DO 

NOT 

DISTRIBUTE