Tesla Motors Inc 1089773E 사용자 설명서

Electronic stability control systems are

actively minimizing wheel spin by
controlling brake pressure and motor
power (indicator flashes). See 

 on page 48. If this indicator

stays illuminated, a fault is detected
(contact Tesla immediately).

Electronic stability control systems are

no longer minimizing wheel spin. See 

 on page 48.

Vehicle Hold is actively applying the

brakes. See 

 on page

51.

 on

 on page 14.

Flashes green when the left turn

signal is operating. Both turn signal
indicators flash green when the
hazard warning flashers are operating.

Flashes green when the right turn
signal is operating. Both turn signal
indicators flash green when the

hazard warning flashers are operating.

When Model 3 is driving (or ready to drive),
the touchscreen shows your current driving

status and a real-time visualization of the road

as detected by the Autopilot components (see 

 on page 55).

Note: The following illustration is provided for
demonstration purposes only. Depending on
vehicle options, software version, and market
region, the information displayed may be

slightly different.

Driving speed.

2. On the energy bar, black (or white in night

brightness) represents energy being used
during acceleration and green indicates
energy being gained through regenerative

braking. A dashed line appears on the
energy bar when power available for

acceleration or power that can be gained
by regenerative braking is being limited.
Model 3 limits power for many reasons.
Here are just a few examples:
•

Acceleration may be limited when the

Battery is reaching a low state of
charge or if the powertrain is hot.

•

Both acceleration and regenerative
braking may be limited when the

ambient temperature is either very
warm or cool.

•

Regenerative braking may be limited
when the Battery is fully charged.

3. Currently selected gear: Park, Reverse,

Neutral, or Drive.

40

Model 3 Owner's Manual

DRAFT 

DO 

NOT 

DISTRIBUTE