MOVEON TECHNOLOGY LIMITED K4GOLD 사용자 설명서

다운로드
페이지 19
K4 Gold 
 
overheat, crack and catch fire.   
Please  do  not  solder  the  contact  points  of  the  battery,  as  this  will  cause  the  battery  to  leak, 
overheat, crack and catch fire.   
If the liquid in the batteries goes into the eyes, there is a risk of blindness. If this occurs do not 
rub the eyes, but immediately rinse eyes with clear water and go to the hospital for treatment.   
Please do not disassemble or modify the battery, as this will cause the battery to leak, overheat, 
crack and catch fire.   
Please  do  not  use  or  place  the  batteries  near  high  temperature  places  such  as  near  a  fire  or 
heating vessel, as this will cause the battery to leak, overheat, crack and catch fire.   
If  the  battery  overheats,  changes  color,  or  becomes  distorted  during  use,  charging,  or  storage, 
please stop using and replace it with a new battery.   
If the liquid from the battery comes in contact with skin or clothing this could cause burning of 
the skin. Immediately use clear water to rinse and seek medical tips if necessary.   
If the battery leaks or gives off a strange odor, please remove the battery from the vicinity of the 
open fire to avoid a fire or explosion.   
Please do no let the battery become wet as this will cause the battery to overheat, smoke and 
corrode.     
Please do not use or place batteries in places of high temperature such as in direct sunlight, as 
this  will  cause  the  battery  to  leak  and  overheat,  lower  performance,  and  shorten  the  battery’s 
life.   
Please do not continuously charge for more than 24 hours.   
1.3.4 Charging your phone 
Connect the connector of charger to the mobile phone. The battery level indicator flashes on the 
screen.  Even  if  the  phone  has  been  turned  off,  the  charging  image  still  appears,  indicating  that 
the battery is being charged. If the phone is overused when the current is insufficient, it may take 
longer time for the charging indicator to appear on the screen after the charging begins. 
When the battery level indicator does not flash and indicates the battery is full, this indicates the 
charging has been completed. If the phone is off during charging, the charging being completed 
image  also  appears  on  the  screen.  The  charging  process  often  takes  3  to  4  hours.  During  the 
charging, the battery, phone and charger gets warm, this is a normal phenomenon.   
Upon  the  completion  of  charging,  disconnect  the  charger  from  AC  power  socket,  and  from  the 
mobile phone.     
Notes: 
During charging, the phone must be placed in well-ventilated environment of  +5℃  ~  +40℃. 
Always  use  the  charger  supplied  by  your  phone  manufacturer.  Using  an  unauthorized  charger 
might cause danger and invalidate the authorization and warranty clauses for your phone.   
The standby time and call duration provided by the manufacturer are based on  ideal operating 
environment. In practice, the battery's operating time varies depending on network conditions, 
operating environment and usage methods.     
Make  sure  the  battery  has  been  installed  before  charging.  It  is  best  not  to  remove  the  battery 
while charging.   
Upon completion of charging, disconnect the charger from your phone and the power supply.   
 
    If you have not disconnected the charger from your phone and the power supply, the charger