InVue ED0991 사용자 설명서
Wireless AP
Base & Sensor
Wipe fixture with alcohol wipe
provided.
provided.
Let it dry completely.
Optional: Drill a 22mm hole in
fixture.
fixture.
1
2
Remove film from all 3 adhesives
on bottom of base and slide base
cord through fixture.
on bottom of base and slide base
cord through fixture.
Optional: Run
cord through back of stand along
fixture.
fixture.
CONTENTS:
One pad saturated in
75%
Isopropyl Alcohol
DIRECTI
ONS:
Apply topically as
needed to cleanse surface mounting area
.
FOR EXTERNAL USE ONLY
KEEP OUT OF REACH OF
CHILDREN
KEEP AWAY FROM EYES
AND FIRE
3
Firmly press base onto fixture for
10 seconds. Plug power supply into
base cord and outlet.
10 seconds. Plug power supply into
base cord and outlet.
4
Place IR2 key onto IR lens on base
and press button on IR2 key once to
transfer code into base.
and press button on IR2 key once to
transfer code into base.
Wipe back of merchandise with
alcohol wipe provided.
alcohol wipe provided.
Let it dry
completely.
Plug power connector into
merchandise and remove clear
film from adhesive on sensor.
merchandise and remove clear
film from adhesive on sensor.
Center sensor onto back of
merchandise. Firmly press
sensor for 10 seconds.
merchandise. Firmly press
sensor for 10 seconds.
5
6
7
CONTENTS:
One pad saturated in
75%
Isopropyl Alcohol
DIRECTIONS:
Apply topically as
needed to cleanse surface mo
unting area.
FOR EXTERNAL USE ONLY
KEEP OUT OF REACH OF
CHILDREN
KEEP AWAY FROM EYES
AND FIRE