Drayson Technologies Limited CS-TAG1 사용자 설명서

To get started with your Tag you’ll need:

– Your CleanSpace Tag

– A Pen / any object to access the Tag’s reset button

– A CleanSpace account. If you don’t already have one then you can Register 

– To install the latest version of the CleanSpace App available from the 

 or 

.

First: Install the app!

– Download the CleanSpace App and install it on your phone.

– Sign in with your CleanSpace account to start using the App.

How to reset & wake the Tag up!

– On the side of your Tag, you’ll see a small reset button (this looks like a small hole).

– Reset: use a pen and press the reset button for 8 seconds. This will reset your Tag and put into

Sleep Mode. This will delete any readings on the Tag.

– Wake up: use a pen and press the reset button shortly when prompted to do so from the app. This

will cause the LED to light up for about 5 – 7 secs and go off again. This will wake up the Tag and put

it into Pairing Mode.

Pair the Tag with your CleanSpace App

1. Make sure your Bluetooth and Wifi/data are on.

2. Open the CleanSpace App.

3. Place your phone close to the Tag.

4. Go to the Air tab in the App, and then choose to view the Air Graph.

CleanSpace 

©2015 

1

Tag Set-up