Sensative AB 001 사용자 설명서
Strips-MaZw ENGLISH
ART.NR-BOM
1. PRODUCT /WARRANTY/WARRANTY PERIOD/DEFECT
Manufacturer warrants to the original end-user purchaser (“Purchaser”) that the
Strips (“Product”) will be free from material defects in material and workmanship
from the date when the Product is delivered to the Purchaser and continues for
twelve (12) months thereafter (“Warranty period”).
2. LIMITATION OF PRODUCT WARRANTY
Manufacturer warrants that the Product under normal use is free from material
defects in material and workmanship (“Defect”) during the Warranty period, subject
to a proper installation, operation and maintenance of the Product as set forth in
the User manual and other documentation available to the Purchaser from time to
time (“User Manual”) at www.sensative.com/strips_tips. Manufacturer does however
not warrant that the Product will operate uninterrupted or error-free or that all
deficiencies, errors, defects or non-conformities will be corrected.
The Warranty extends only to Purchaser and is not transferable to anyone else.
The Warranty extends only to Purchaser and is not transferable to anyone else.
3. CLAIMS PROCEDURE
Warranty claims is handled at www.sensative.com/Strips_tips
1. The warranty shall not apply to problems or damages resulting from
i) mechanical and transport problems
ii) external causes such as accidents, acts of God, disasters, weather
ii) external causes such as accidents, acts of God, disasters, weather
conditions, air pollution, abuse, misuse, misapplication or any equipment
that generates electrical disturbance of radio communication that violates
FCC regulations
iii) negligence, improper handling and failure to operate the Product in
iii) negligence, improper handling and failure to operate the Product in
accordance with specifications and interface requirements
iv) operating and storage problems
iv) operating and storage problems
2. EXCKLUSIONSv) electrical power problems, telecommunications and/or
network problems
vi) problems related to software updates in the Gateway and to security
issues with the Z-Wave protocol
vii) change of Strips position, window/door position
viii) if Strips has been in extreme temperature
vii) problems regarding accessories or attachments not recommended by
vii) change of Strips position, window/door position
viii) if Strips has been in extreme temperature
vii) problems regarding accessories or attachments not recommended by
Manufacturer or modifications to the Product or its parts
viii) failure to follow instructions relating to the Product´s use or installation and
to fulfil the maintenance and servicing activities defined in the User Manual and
information published at www.sensative.com
ix) damage to property, damage caused by service performed by anyone who is not
ix) damage to property, damage caused by service performed by anyone who is not
an authorized representative of Manufacturer,
x) a product or part that has been modified to alter functionality or capability
xi) a Product that is used commercially or for a commercial purpose
xii) failure of goods or services not obtained from Manufacture
Manufacturer does not authorize any person or party to assume or create for it any
x) a product or part that has been modified to alter functionality or capability
xi) a Product that is used commercially or for a commercial purpose
xii) failure of goods or services not obtained from Manufacture
Manufacturer does not authorize any person or party to assume or create for it any
obligations or liability in connection with the Product except as set forth herein.
This warranty shall not apply to any Product if the Manufacturer´s serial number
This warranty shall not apply to any Product if the Manufacturer´s serial number
has been removed or defaced in any way.
MANUFACTURER IS NOT RESPONSIBLE FOR ANY PROBLEM OR DAMAGE THAT
MANUFACTURER IS NOT RESPONSIBLE FOR ANY PROBLEM OR DAMAGE THAT
OCCURS AS A RESULT OF PURCHASER´S FAILURE TO FOLLOW THE USER´S
MANUAL see www.sensative.com/strips_tips
1. GENERAL TERMS
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY MANUFACTURER MAKES
NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE
AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. MANUFACTURER
EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS WARRANTY. ANY
IMPLIED WARRANTIES THAT MAY BE IMPOSED BY STATUTORY LAW ARE LIMITED
IN DURATION TO THE WARRANTY PERIOD HEREUNDER.
IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR ANY LOSS OF DATA
OR ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL
DAMAGES OR DAMAGES FOR LOSS OF PROFITS, REVENUE OR USE
INCURRED BY PURCHASER OR ANY THIRD PARTY, WHETHER IN ACTION,
IN CONTRACT, OR TORT,OR OTHERWISE EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
MANUFACTURER´S LIABILITY AND PURCHASER´S EXCLUSIVE REMEDY
MANUFACTURER´S LIABILITY AND PURCHASER´S EXCLUSIVE REMEDY
FOR ANY CAUSE OF ACTION ARISING IN CONNECTION WITH THE SALE
OR USE OF THE PRODUCTS WHETHER BASED ON NEGLIGENCE, STRICT
LIABILITY, BREACH OF WARRANTY OR EQUITABLE PRINCIPLES IS
EXPRESSLY LIMITED TO MANUFACTURER´S OPTION OF REPLACEMENT
OF OR REPAYMENT OF THE PRODUCT PRICE FOR THAT PORTION OF
PRODUCTS WITH RESPECT TO WHICH DAMAGES ARE CLAIMED:
TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS
TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS
WARRANTY STATEMENT ARE PURCHASER´S SOLE AND EXCLUSIVE
REMEDIES AGAINST MANUFACTURER. [THEY DO NOT HOWEVER AFFECT
OR RESTRICT THE RIGHTS THAT PURCHASER MAY HAVE AGAINST THE
BUSINESS WHERE PURCHASER BOUGHT THE PRODUCT FROM]
ALL CLAIMS OF ANY KIND ARISING IN CONNECTION WITH THE SALE OR
ALL CLAIMS OF ANY KIND ARISING IN CONNECTION WITH THE SALE OR
USE OF THE PRODUCT SHALL BE DEEMED WAIVED UNLESS MADE IN
WRITING WITHIN 30 DAYS FROM MANUFACTURER’S DELIVERY OR THE
DATE FIXED FOR DELIVERY IN THE EVENT OF NON DELIVERY.
WARNINGS:
i) THE PRODUCT SHALL NOT BE EXPOSED TO EXTENSIVE TEMPERATURE, FIRE,
i) THE PRODUCT SHALL NOT BE EXPOSED TO EXTENSIVE TEMPERATURE, FIRE,
CHEMICALS, EXPLOSION,
II) THE PRODUCT SHOULD NOT BE IN CONTACT WITH FOOD OR OTHER
II) THE PRODUCT SHOULD NOT BE IN CONTACT WITH FOOD OR OTHER
LIVEHOOD
III) DO NOT DISSEMBLE THE PRODUCT; RECHARGE THE BATTERY, DISCHARGE,
III) DO NOT DISSEMBLE THE PRODUCT; RECHARGE THE BATTERY, DISCHARGE,
SHORT-CIRCUIT OR INCINIRATE
IV) DO NOT KEEP THE PRODUCT IN CONTACT WITH EXPLOSIVE GASES
V) THE PRODUCT IS NOT TO BE PLACED IN A MICRO WAVE, OVEN, WACHING
IV) DO NOT KEEP THE PRODUCT IN CONTACT WITH EXPLOSIVE GASES
V) THE PRODUCT IS NOT TO BE PLACED IN A MICRO WAVE, OVEN, WACHING
MACHINE, LAUNDRY DRYER,
VI) Products use very strong neodymium magnets which can be hazardous if
VI) Products use very strong neodymium magnets which can be hazardous if
swallowed. Please keep them away from children, high heat sources or open
flames. Magnets can interfere or damage certain magnetic media, including but not
limited to optical hard drives, televisions, magnetic storage media, pace-makers
and other sensitive electronics.
VII) DO NOT DISPOSE OF ELECTICAL APPLIANCE AS UNSORTED MUNICIPAL
VII) DO NOT DISPOSE OF ELECTICAL APPLIANCE AS UNSORTED MUNICIPAL
WASTE, USE SEPERATE COLLECTION FACILITIES.
FCC NOTICE (for USA):
This device complies with Part 15 of the FCC Rules. Operation is subject
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Federal Communication Commission (FCC) Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, human proximity to the antenna shall
Federal Communication Commission (FCC) Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, human proximity to the antenna shall
not
be less than 20cm (8 inches) during normal operation.
The antenna(s) used for this transmitter must not be co-located or operating
be less than 20cm (8 inches) during normal operation.
The antenna(s) used for this transmitter must not be co-located or operating
in
conjunction with any other antenna or transmitter.
Any changes or modifications not expressly approved by Sensative could void the
conjunction with any other antenna or transmitter.
Any changes or modifications not expressly approved by Sensative could void the
user’s authority to operate equipment.
INDUSTRY CANADA STATEMENTS:
Cet appareil est conforme avec Industrie Canada exempt de licence
Rss standard(s). Son fonctionnement est soumis aux deux conditions
suivantes : (1) cet appareil ne peut causer d’interférences, et (2) cet appareil
doit accepter toute interférence, y compris des interférences qui peuvent
provoquer un fonctionnement indésirable du périphérique.
Ce dispositife est conforme à la norme de sécurité en matière d’exposition
RF conformément à la RSS-102 §2.5.2. Ce dispositif doit être installé et
utilisé conformément aux instructions fournies et à 20 cm espacement
minimal doit être prévu entre l’antenne et le corps de toute personne pendant
les modes sans fil de fonctionnement.
Cet appareil est conforme avec Industrie Canada exempt de licence
Rss standard(s). Son fonctionnement est soumis aux deux conditions
suivantes : (1) cet appareil ne peut causer d’interférences, et (2) cet appareil
doit accepter toute interférence, y compris des interférences qui peuvent
provoquer un fonctionnement indésirable du périphérique.
Ce dispositife est conforme à la norme de sécurité en matière d’exposition
RF conformément à la RSS-102 §2.5.2. Ce dispositif doit être installé et
utilisé conformément aux instructions fournies et à 20 cm espacement
minimal doit être prévu entre l’antenne et le corps de toute personne pendant
les modes sans fil de fonctionnement.
INDUSTRY CANADA STATEMENTS:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation
of the device.
This equipment complies with the safety requirements for RF exposure in
accordance with RSS-102 §2.5.2. This equipment must be installed and
operated in accordance with the provided instructions and a minimum 20 cm
spacing must be provided between the antenna and any person’s body
during wireless modes of operation.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation
of the device.
This equipment complies with the safety requirements for RF exposure in
accordance with RSS-102 §2.5.2. This equipment must be installed and
operated in accordance with the provided instructions and a minimum 20 cm
spacing must be provided between the antenna and any person’s body
during wireless modes of operation.
INDUSTRY CANADA NOTICE:
“This device complies with ISED’s licence-exempt RSSs. Operation is subject to the
“This device complies with ISED’s licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device”