Skyunion Technology Co. Ltd. HPL 사용자 설명서

2. Play/Pause music

3. Prev/Next music 

4. Receive/Reject call 

5. Volume Adjustment

6. Line-in(Aux in) Connection Jack

7. Micro USB charge port 

8. USB

9. Audio input mode selection

10. LED display mode selection

1：Bluetooth Version:V2.1+EDR
2：Support Profiles: HFP/L2CAP/A2DP /AVCTP/ 

       AVDTP / AVCRP

3：Output Power: 10W × 1
4：THD: < 0.5%
5：S/N: >90dB
6：Transmission Distance: up to 32 Feet
7：Frequency: 2.402-2.480GHz
8：Frequency Response: 20Hz-20kHz
9：Play Time: About 6 hours continuously

10：Net Weight: 1.33 lbs
11：Battery Capacitor: 4000mA/3.7v
12：Charge Current:5V/2A
13：Charge Time: About 2-3 hours
14：Power Bank Output:5V/1.5A
15：Production Dimensions: 7.2x3.3x3.3 inches

1.Slide on/off switch to ON position, the speaker will go into 
   Bluetooth pairing mode automatically, and blue LED will blink 
   continuously to show it is ready to pair.

2.Enable the Bluetooth function on your mobile device and 
   search for the Bluetooth speaker.

3.Select device named SK-01 that has been newly added to 
   pair, then it will sound the device connected successfully, 
   the blue LED will off when it connected successfully.

4.Enjoy music via your mobile device.

5.Pause/ Play: Short press this button to play/pause the music 
   of the device,you could use this key to receive or reject a call 
   when your Bluetooth speaker have a call coming.

6.Change Songs: Short press PREVIOUS or NEXT button to play 
    previous or next music.

7. Volume Adjustment: Long press PREVIOUS or NEXT button to 
    turn the volume up or down.

8. Mode: Press MODE button to change the audio source around 
    Bluetooth/TF card/USB/AUX.

    

9. LED Mode: Press this key you could change the LED display 

      station.

1.       OFF/LED/ON

Plug the Micro USB charging cable into DC 5V/USB port to 
charge the device.

The standard USB ports charge external devices, such as smart

phones, tablets and other USB powered devices.

Plug the USB power cable of your device into the USB port on

the Product.

1：Bluetooth Speaker ×1
2：3.5mm Audio Cable ×1
3：Micro USB Charging Cable ×1
4：User Manual ×1

• Make sure your mobile devices are Bluetooth-enabled before 
    using this product.
• Make sure the speaker is fully charged when using for the 

    first  time. 

• In order to protect the circuit of this speaker and ensure the 
    long-term performance of the built-in battery, please do not 
    play music while charging.

LED Mode

MIC

1

2

3

Button Introduction :

1: Left side "OFF" button,charging function enabled,

    offering the maximun current for 2 Amh.
2: LED position for night light LED function .

3: Right side "ON" button ,Bluetooth connective function .

Prev

This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to part 15 of 

the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following 

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different 

   from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician 

   for help.
Caution: Any changes or modifications to this device not 

explicitly approved by manufacturer could void your authority 

to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation 

]is subject to the following two conditions: (1) This device may 

not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause 

undesired operation.

Ctech Science&Technology Co., Ltd, declares that this 

Radio-Frequency peripheral is in compliance with the essential 

requirements and other relevant provisions of Directive 

1999/5/EC.

Model:SK-01