AMD Sempron™ Processor-In-a-Box 2600+ SDA2600BOX 사용자 설명서
제품 코드
SDA2600BOX
42
Signal and Power-Up Requirements
Chapter 8
AMD Sempron™ Processor Model 10 Data Sheet
31993A-1 September 2004
AMD Preliminary Information
Clock Multiplier
Selection (FID[3:0])
Selection (FID[3:0])
The chipset samples the FID[3:0] signals in a chipset-specific
manner from the processor and uses this information to
determine the correct serial initialization packet (SIP). The
chipset then sends the SIP information to the processor for
configuration of the AMD Athlon system bus for the clock
multiplier that determines the processor frequency indicated
by the FID[3:0] code. The SIP is sent to the processor using the
SIP protocol. This protocol uses the PROCRDY, CONNECT, and
CLKFWDRST signals, that are synchronous to SYSCLK.
manner from the processor and uses this information to
determine the correct serial initialization packet (SIP). The
chipset then sends the SIP information to the processor for
configuration of the AMD Athlon system bus for the clock
multiplier that determines the processor frequency indicated
by the FID[3:0] code. The SIP is sent to the processor using the
SIP protocol. This protocol uses the PROCRDY, CONNECT, and
CLKFWDRST signals, that are synchronous to SYSCLK.
For more information about FID[3:0], see “FID[3:0] Pins” on
page 70.
page 70.
Serial Initialization Packet (SIP) Protocol. Refer to AMD Athlon™ and
AMD Duron™ System Bus Specification, order# 21902 for details
of the SIP protocol.
AMD Duron™ System Bus Specification, order# 21902 for details
of the SIP protocol.
8.2
Processor Warm Reset Requirements
Northbridge Reset
Pins
Pins
RESET# cannot be asserted to the processor without also being
asserted to the Northbridge. RESET# to the Northbridge is the
same as PCI RESET#. The minimum assertion for PCI RESET#
is one millisecond. Southbridges enforce a minimum assertion
of RESET# for the processor, Northbridge, and PCI of 1.5 to 2.0
milliseconds.
asserted to the Northbridge. RESET# to the Northbridge is the
same as PCI RESET#. The minimum assertion for PCI RESET#
is one millisecond. Southbridges enforce a minimum assertion
of RESET# for the processor, Northbridge, and PCI of 1.5 to 2.0
milliseconds.