Kramer Electronics HDMI over Twisted Pair Receiver PT-572 전단
제품 코드
PT-572
PT-572
HDMI over Twisted Pair Receiver
The PT
−
572 is a DGKat™ twisted pair
receiver for HDMI signals. The PT
−
571
converts an HDMI signal to a single twisted
pair signal and the PT
pair signal and the PT
−
572 converts the
twisted pair signal back to an HDMI signal.
Max. Data Rate
- Up to 1.65Gbps; WUXGA, 1920x1080p.
HDTV Compatible.
HDCP Compliant.
DGKat™ Signal Integration
- Kramer’s unique technology for converting TMDS as well as control and communication
to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed
specifically for optimum performance.
specifically for optimum performance.
HDMI Support
- HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby
TrueHD, DTS
−
HD).
3D Pass-Through.
System Range
- Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC
−
DGKat524 cable. Up to
90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC
−
DGKat623 cable. Up to 100m (330ft) at 1080i or
up to 90m (295ft) at 1080p on shielded BC
−
DGKat7a23 cable.
Cable
- Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's
BC
−
DGKat524, BC
−
DGKat623 and BC
−
DGKat7a23 cables. Note that the transmission range depends on the signal
resolution, graphics card and display used. The distance using non
−
Kramer CAT 5, CAT 6, and CAT 7 cables may
not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
EDID PassThru
- Passes EDID/HDCP signals from source to display.
Status LED
- Lights red when receiving power only, orange when output and power are attached, and yellow when
both an active input and output are attached.
Power Connect™ System
- A single connection to the transmitter powers the receiver.
Ultra-Compact Pico TOOLS™
- 4 units can be rack mounted side
−
by
−
side in a 1U rack space with the optional
RK
−
4PT rack adapter.
FEATURES