Lexmark X5075 11N1522 사용자 설명서

Press 

 or 

 repeatedly until Dial Prefix appears.

Press  .

To change the setting, press 

 or 

 repeatedly until Create appears.

Press  .

Enter the prefix to be dialed before each telephone number.

Press  .

Check to make sure Speed Dial has been programmed for the number that you want to dial. See “Setting up
Speed Dial” on page 61.

As an alternative, dial the telephone number manually.

See “Sending a fax while listening to a call (On Hook Dial) using the control panel” on page 41.

Check the Dial Method setting.

Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this means it did not
recognize the dial tone.

From the control panel, press Fax Mode.

Press 

.

Press 

 or 

 repeatedly until Fax Setup appears.

Press  .

Press 

 or 

 repeatedly until Dialing and Sending appears.

Press  .

Press 

 or 

 repeatedly until Dial Method appears.

Press  .

Press 

 or 

 repeatedly until Behind PBX appears.

Press   to save this setting.

These are possible causes and solutions. Try one or more of the following:

Ask the sender to verify the original document was loaded correctly.

Check the ink levels, and install a new print cartridge if necessary.