AASTRA RFP 34 IP 69205 전단

제품 코드
69205
다운로드
페이지 2
Copyright © 2011 Aastra Technologies Limited. Aastra and the Aastra logo are trademarks or registered trademarks of Aastra Tech-
nologies Limited in the United States, Canada, European Union and other countries. Picture similar to product. The right for technical 
modifications is reserved.
Ref
er
enc
e 09/2011
Aastra Technologies Limited
155 Snow Blvd.
Concord, Ontario Canada
L4K 4N9
www.aastra.com
Features
DECT
 

All 120 (in America 60) DECT channels 
supported for maximum use of DECT 
capacity
 

8 simultaneous voice channels per RFP, 
4 additional channels for handover
 

GAP standard supported
 

Connection handover in line with the 
GAP standard
 

DSAA  authentication  between  base 
and handset
 

Support of DECT encryption
 

Cordless  system  telephones  can  use 
all  features  offered  by  the  OpenCom 
100, 1000 and SIP-DECT
 

Integrated DECT antenna in RFP (L)32 
IP
 

External dipole or directional antenna 
on the RFP (L)34 IP
Service and Installation
 

3  LEDs  signalling  the  current  opera-
ting state: on RFP (L)32 IP outside, on 
RFP (L)34 IP inside
 

Central configuration 
 

Central system journal
 

Central cluster administration
 

Wiring alternatively from below (cable 
duct)  or  from  above  (suspended  cei-
ling) for RFP (L)32 IP
 

RFP (L)34 IP can be connected via RJ 
45  or  IDC  (insulation  displacement 
contact) connectors
Ethernet
 

Connection via Ethernet 100 BaseT
 

Power supply in line with Power over 
Ethernet standard IEEE 802.3af, class 0
 

IPv4
VoIP
 

VoIP  connection  using  RTP  /  RTCP 
protocol
 

G.711  /  G.723.1  /  G.729AB
1
  codec 
depending  on  required  voice  quality 
and available bandwidth 
 

Quality  of  service  supported  by  Diff-
serv/ToS Flag
 

Adaptive jitter compensation
 

Echo cancellation / suppression
 

Voice  activity  detection  and  comfort 
noise generator
Requirements
 

DHCP
 

TFTP
RFP (L)32 IP (Indoor)
 

Power supply:
• 
 Power  over  Ethernet  IEEE  802.3af, 
class 0 or
• 
230 V AC adapter
 

Ambient temperature:  
-5°C to +45°C
 

Relative humidity: 
5 to 95% (non-condensing)
 

Storage temperature:  
-40°C to +70°C
 

Current consumption: 120mA
 

Type of ingress protection: IP 20
 

Flame resistance UL94 V0-5VB
 

Wall-mountable
 

Colour: ice grey
 

Weight: 417 g (without AC adapter)
 

Dimensions (W x H x D): 
195 x 200 x 30 mm
RFP (L)34 IP (Outdoor)
 

Power supply:  
Power over Ethernet IEEE 
802.3af, class 0
 

Ambient temperature:  
-25°C to +55°C
 

Relative humidity: 
5 to 95% (non-condensing)
 

Storage temperature:  
-5°C to +45°C
 

Current consumption: 120mA
 

Type of ingress protection: IP 65
 

Flame resistance UL94 V0
 

Wall- and mast-mountable
 

Colour: light grey
 

Weight: 1.006 g
 

Dimensions (W x H x D): 
240 x 243 x 60 mm
Part numbers RFP (L)32 IP
 

RFP 32 IP (just for EMEA and Australia) 
69207
 

RFP L32 IP (just for EMEA and 
Australia) 
68883
 

RFP 32 (just for America)
D0069-135D-00-00 
 

AC adapter for EMEA, NA, UK and 
Australia 
68744
Part numbers RFP (L)34 IP
 

RFP 34 IP (without antennas and just 
for EMEA and Australia) 
69205
 

RFP L34 IP (without antennas and just 
for EMEA and Australia) 
68882
 

RFP 34 (with dipole antennas, just for 
America) 
D0069-134-00-00
 

Dipole antennas  
4602421
 

Directional antenna  
4602422
 

Wall-mounting set 
4602286
 

Mast-mounting device Ø 65 mm 
4602437
 

Mast-mounting device Ø > 65 mm 
4602285
 

Antenna-mounting device 
71061801
 

Antenna cable 0,5m 
4604685
(1) Additional licence required