HP 2620-24 J9623A-HPN - NEW RETAIL 데이터 시트

제품 코드

J9623A-HPN - NEW RETAIL

HP 2620 Switch Series

Specifications

HP 2620-24 Switch (J9623A)

HP 2620-24-PPoE+ Switch (J9624A)

HP 2620-24-PoE+ Switch (J9625A)

Ports

24 autosensing 10/100 ports (IEEE 802.3 Type
10BASE-T, IEEE 802.3u Type 100BASE-TX); Media
Type: Auto-MDIX; Duplex: half or full

1 RJ-45 serial console port

2 autosensing 10/100/1000 ports (IEEE 802.3
Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only

2 open mini-GBIC (SFP) slots

12 RJ-45 autosensing 10/100 ports (IEEE 802.3
Type 10BASE-T, IEEE 802.3u Type 100BASE-TX);
Media Type: Auto-MDIX; Duplex: half or full

12 RJ-45 autosensing 10/100 PoE+ ports (IEEE
802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3at PoE+); Duplex: half or
full

1 RJ-45 serial console port

2 autosensing 10/100/1000 ports (IEEE 802.3
Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only

2 open mini-GBIC (SFP) slots

24 RJ-45 autosensing 10/100 PoE+ ports (IEEE
802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3at PoE+); Media Type:
Auto-MDIX; Duplex: half or full

1 RJ-45 serial console port

2 autosensing 10/100/1000 ports (IEEE 802.3
Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only

2 open mini-GBIC (SFP) slots

Physical characteristics
Dimensions

10(d) x 17.44(w) x 1.73(h) in. (25.4 x 44.3 x 4.39
cm) (1U height)

14.5(d) x 17.44(w) x 1.73(h) in. (36.83 x 44.3 x
4.39 cm) (1U height)

Weight

5.7 lb. (2.59 kg), Fully loaded

7.04 lb. (3.19 kg)

10.67 lb. (4.84 kg), Fully loaded

Memory and processor
Processor

PowerPC FreeScale 8313 @ 400 MHz, 512 MB
flash, 512 MB SDRAM, 4 MB flash ROM; packet
buffer size: 1 MB

Power PC FreeScale 8313 @ 400 MHz, 512 MB
flash, 512 MB SDRAM, 4 MB flash ROM; packet
buffer size: 1 MB

Mounting

Mounts in an EIA-standard 19 in. telco rack or
equipment cabinet (hardware included); horizontal
surface mounting only

Performance

IPv6 Ready Certified

100 Mb Latency

< 8.3 µs (LIFO 64-byte packets)

< 8.3 µs (LIFO)

1000 Mb Latency

< 2.9 µs (LIFO 64-byte packets)

< 2.9 µs (LIFO)

Throughput

up to 9.5 million pps

Routing/Switching capacity

12.8 Gbps

MAC address table size

16000 entries

Environment
Operating temperature

32°F to 131°F (0°C to 55°C)

Operating relative humidity

15% to 95% @ 104°F (40°C), noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

15% to 90% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft. (3 km)

Acoustic

Power: 0 dB, Pressure: 0 dB No Fan

Power: 37.1 dB, Pressure: 25.9 dB

Power: 34.0 dB, Pressure: 29.7 dB

Electrical characteristics

Achieved Miercom Certified Green Award

Voltage

100-127/200-240 VAC

Idle power

13.3 W

22.0 W

22.8 W

Maximum power rating

22.1 W

165.8 W

428.0 W

PoE power

0 W

128 W

382 W

Frequency

50/60 Hz

Notes

Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
PoE power is the power supplied by the internal
power supply. It is dependent on the type and
quantity of power supplies and may be
supplemented with the use of an external power
supply (EPS).

Safety

EN 60950/IEC 60950; CAN/CSA 22.2 No.
60950; EN 60825; UL 60950

Emissions

FCC Class A; VCCI Class A; EN 55022/CISPR 22
Class A