Thomson 42" Plasma TV Hi-Pix2 42 PB 130 S5 42PB130S5 사용자 설명서

You can set preferences for some features.These preferences remain in force as long as you
do not change them.

Display the 

menu by pressing the 

button. Select the 

option and confirm by pressing 

. Select the 

option from the

menu and press 

to confirm.The 

menu offers the

following options:

: check this box using the 

button to permanently display the

number of the channel being watched.

: Due to the risk of screen burnout, we recommend that you disable this

function.

: select from the list the language the menus will be displayed in using the 

buttons.

: set the maximum volume level using the 

buttons.To hear

the level that you have just set, press the 

button and hold it for a few seconds.

 Programme info pages

: if you have changed the reference page for the TV

programmes in Teletext you can restore the factory-set reference pages. Press 

until the

message 

appears. Once the setting is implemented the message 

appears.

: when this function is active the TV set automatically goes into

standby mode after five minutes if it does not receive any signal on the selected channel or
AV programme.To enable this function, check the box by pressing 

.

: use this function if one of the following situations occurs:

- Some channel names are missing following auto installation. Check/uncheck the box by

pressing 

and run autoinstallation again.

- Teletext subtitles are not visible or are frozen. Check/uncheck the box by pressing 

and access the Teletext page displaying the subtitles.

- Some Teletext lines never display. Check/uncheck the box by pressing 

and access the

Teletext page again.

The box is checked by default.

: when this function is on, it moves the picture on screen without

the user noticing it in order to prevent screen burnout.

Press 

to close the menu. Select the option 

and press 

to return to the

menu.

You can configure your TV set according to the equipment you connect to it.

Display the 

menu by pressing the 

button. Select the 

option and press 

to confirm.The 

menu appears. Select the 

option and press 

to confirm. Follow the messages on screen and the

instructions below explaining how to configure the AV sockets.

: use the 

buttons to select from the list the name of the equipment

connected to this socket. If the factory preset names do not suit you, select 

and

enter another one, following the screen messages.

: use the 

buttons to select from the list the type of video signal

transmitted by the equipment connected to the AV1 socket.

Repeat the same procedure to configure the AV2 socket.





‹

‹ English...













¦‹ keys.

‹

‹ DECOD.

IFC130-P_EN  22/11/05  9:55  Page 16