Intel S1200BTLR 사용자 설명서
Intel® Server Board S1200BT TPS
Jumper Blocks
Revision 1.0
Intel order number G13326-003
105
Figure 47. Jumper Blocks (J2G1, J1G1, J1H3, and J2J1) on S1200BTS
Table 43. Server Board Jumpers (J2G1, J1G1, J1H3, and J2J1) on S1200BTS
Jumper Name
Pins
System Results
J1H3: CMOS
Clear
Clear
1-2
These pins should have a jumper in place for normal system operation. (Default)
2-3
If these pins are jumpered with AC power plugged, the CMOS settings are cleared within
five seconds. These pins should not be jumpered for normal operation.
five seconds. These pins should not be jumpered for normal operation.
J1J2: ME Force
Update
Update
1-2
ME Firmware Force Update Mode
– Disabled (Default)
2-3
ME Firmware Force Update Mode
– Enabled
J1G1:
Password Clear
Password Clear
1-2
These pins should have a jumper in place for normal system operation. (Default)
2-3
If these pins are jumpered, administrator and user passwords are cleared within 5-10
seconds after the system is powered on. These pins should not be jumpered for normal
operation.
seconds after the system is powered on. These pins should not be jumpered for normal
operation.
J2G1: BIOS
Recovery
Recovery
1-2
These pins should have a jumper in place for normal system operation. (Default)
2-3
Given that the main system BIOS will not boot with these pins jumpered, system can only
boot from EFI-bootable recovery media with the recovery BIOS image.
boot from EFI-bootable recovery media with the recovery BIOS image.
8.1 CMOS Clear and Password Reset Usage Procedure
The CMOS Clear and Password Reset recovery features are designed such that the desired
operation can be achieved with minimal system downtime. The usage procedure for these two
operation can be achieved with minimal system downtime. The usage procedure for these two