WatchGuard VPN Manager 11 to 20 Users WG4020 사용자 설명서

제품 코드
WG4020
다운로드
페이지 5
WATCHGUARD SYSTEM MANAGER 
WSM 8.0 
RELEASE NOTES 
MAY 12, 2005 
PAGE 2 
 
„
 
Support for SNMP to monitor important device statistics. You can also transmit SNMP traps to SNMP 
servers.  
For more information or to purchase the upgrade for a Firebox X Core device, contact your reseller or browse to 
the WatchGuard Web site. 
Enhancements to WFS appliance software 
The WatchGuard System Manager 8.0 includes WFS 7.4 appliance software. This version has two important 
features. 
„
 
WSM 8.0 uses a Management Server that operates on a Windows server instead of on a gateway Firebox. 
This allows for much more scalability and flexibility when you set up a large network with many locations. 
„
 
The Log Server saves log messages in an XML format.  
Changes in WFS Appliance Software 7.3 to 7.4 
WatchGuard released the final version of WFS 7.3 on December 23, 2004. WatchGuard System Manager 
includes the WFS 7.4. This is the WFS 7.3 appliance software with some minor differences.  
„
 
WFS 7.4 includes the SYNFlood (Hotfix 050209) and Link Negotiation (Hotfix 050216).  
„
 
WFS 7.4 does not include the PPPoE (Hotfix 050330) hotfix. You can not install this hotfix on WFS 7.4. If 
you installed the hotfix and upgrade your device to WFS 7.4, you no longer have the corrections to the 
problems identified and resolved with this hotfix. 
[5517]
 
„
 
WFS 7.4 does not include the Gateway AntiVirus for E-mail Engine Update version 0.8, 1.0.1. You can not 
install this update on WFS 7.4. If you installed the update and upgrade your device to WFS 7.4, your device 
will use the original Gateway AntiVirus for E-mail Engine. 
„
 
WFS 7.4 requires that you move your DVCP server from the Firebox to a computer.  
„
 
WFS 7.4 does not support Basic DVCP. 
„
 
The Management Server is the computer you use as the DVCP server. It can not be a Firebox.  
„
 
The VPN Manager is now known as the WatchGuard System Manager.  
„
 
You can not use the WatchGuard System Manager to connect to a Firebox DVCP server with WFS 7.3 or 
earlier firmware. The WSM will only connect to WSM 8.0 DVCP servers. It will also connect directly to 
Firebox devices with WFS 7.4 or Fireware 8.0 firmware. 
Technical Assistance 
For technical assistance, please contact WatchGuard Technical Support via telephone (see the numbers in the 
table below) or check the website at 
http://www.watchguard.com/support
. When contacting Technical Support, 
please have your registered LiveSecurity® key, serial number, or Partner ID ready. 
 
Phone Number 
U.S. End Users 
877.232.3531 
International End User 
+1.206.613.0456 
Authorized WatchGuard Resellers 
206.521.8375