Omnitron iConverter Tx/2Tx 8400-0 전단
제품 코드
8400-0
ORDERING INFORMATION
Page 2
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • info@omnitron-systems.com • 140 Technology Dr., Irvine, CA 92618
iConverter
Tx/2Fx and Tx/2Tx
© 2012 Omnitron Systems Technology, Inc. All rights reserved.
iConverter
and
NetOutlook
are Registered Trademarks of Omnitron Systems Technology, Inc.
Trademarks are owned by their respective companies. Specifications are subject to change without notice.
091-18400-002E 12/12
SPECIFICATIONS
MANAGEMENT
Management is accomplished by using a Network Management
Module (NMM) or a media converter with integrated management
(such as an iConverter 10/100M2) that provides monitoring,
remote configuration and trap notification. The management
module can be accessed via SNMP, Telnet and via a serial
port. The SNMP-based management is accomplished via
Omnitron’s intuitive, graphic-oriented NetOutlook management
software or third party SNMP management software.
Management via the Telnet and the serial interfaces have an
easy-to-use, menu-driven interface.
Some of the real-time parameters that can be monitored
Some of the real-time parameters that can be monitored
include port state (active, standby), link and data receive
status. Other parameters include module type and model,
hardware and software revisions, serial numbers, and an
user-defined identifier.
The user can override the redundant module’s physical DIP-
The user can override the redundant module’s physical DIP-
switch settings by using SNMP or Telnet to remotely configure
DIP-switch-selectable parameters such as Link Propagate,
Link Segment or Remote Fault Detection.
In addition to all standard iConverter SNMP traps such as
In addition to all standard iConverter SNMP traps such as
module insertion and removal, the redundant modules can
generate traps on port state changes including link-up and link-
down. Trap monitoring of specific events can be selectively
enabled or disabled by the network administrator.
Model Type
Tx/2Fx
Tx/2Tx
Protocols
100BASE-FX, 100BASE-TX
100BASE-TX
Primary
Connectors
RJ-45
RJ-45
Redundant
Connectors
SC, ST, LC, Single-Fiber SC
RJ-45
Controls
UTP X-over, LS/LP, RFD, SFD,
UTP Auto/Man, FDX/HDX
UTP X-over, LS/LP, RFD, SFD,
UTP Auto/Man, FDX/HDX
LED Displays
Power, FO link, UTP link,
Select, Auto, FDX/HDX
Power, UTP link, UTP link,
Select, Auto, FDX/HDX
Dimensions
W: 0.85” x D: 4.5” x H: 2.8”
Weight
8 oz.
Compliance
UL, CE, FCC Class A
Power
Requirement
0.7A @ 3.3VDC (typical)
1.1A @ 3.3VDC
Temperature
Standard:
Wide:
Storage:
0 to 50
o
C
-40 to 60
o
C
-40 to 80
o
C
Humidity
5 to 95% (non-condensing)
Altitude
-100m to 4000m
MTBF (hrs)
520,000
Type
Distance
Connector Type
Tx
[nm]
Rx
[nm]
Min. Tx
Power
[dBm]
Max. Tx
Power
[dBm]
Min. Rx
Power
[dBm]
Max. Rx
Power
[dBm]
Min.
Attenuation
(dB)
Link
Budget
[dB]
ST
SC
LC
RJ-45
Tx/2Fx
MM/DF
5km
8420-0
8422-0
-
-
1310
1310
-24
-14
-31
-14
-
7
SM/DF
30km
8421-1
8423-1
8427-1
-
1310
1310
-15
-8
-31
-8
-
16
SM/DF
60km
8421-2
8423-2
8427-2
-
1310
1310
-5
0
-31
-3
3
26
SM/DF
120km
-
8423-3
8427-3
-
1550
1550
-5
0
-31
-3
3
26
SM/SF
20km
-
8430-1
-
-
1310
1550
-15
-5
-30
-3
-
15
SM/SF
20km
-
8431-1
-
-
1550
1310
-15
-5
-30
-3
-
15
SM/SF
40km
-
8430-2
-
-
1310
1550
-8
0
-30
-3
3
22
SM/SF
40km
-
8431-2
-
-
1550
1310
-8
0
-30
-3
3
22
SM/SF
60km
-
8430-3
-
-
1310
1550
-5
0
-31
-3
-
26
SM/SF
60km
-
8431-3
-
-
1550
1310
-5
0
-31
-3
-
26
Tx/2Tx
UTP
100m
-
-
-
8400-0
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
For wide temperature (-40 to 60
o
C), add a “W” to the end of the model number. Consult factory for extended temperature (-40 to 75
o
C) models.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.