Motorola CD2 CD202 사용자 설명서

Help

35

S

•  Bad battery contact – move the handset slightly
•  Dirty contact – Clean the battery contact with a cloth 

moistened with alcohol

•  Battery is full – no need to charge

•  No power – check the connections. Reset the phone: 

unplug and plug back in the mains

•  Batteries are empty – charge the batteries for at least 24 

hours

•  You are too far from the base – move closer to the base
•  Wrong line cable – use the line cable provided
•  Line adaptor (when needed) is not connected to the line cord 

– connect the line adaptor (when needed) to the line cord

The base is too close to electrical appliances, reinforced 
concrete walls or metal doorframes – move the base at least 
one metre away from any electrical appliances

E

•  Handset is not registered to the base – register the 

handset to the base

•  You are too far from the base – move closer to the base

•  The ring tone is deactivated.
• Increase 

the 

volume.

Check your subscription with your network operator

The phonebook is full. Delete an entry to free memory

•  Try recharging or replacing the batteries.
•  Try disconnecting and connecting the base power 

supply.

•  If LED is not lit up, then try disconnecting and connecting 

the base power supply.

•  Maximum number of 5 handsets has been reached.
• The 

display 

shows 

. You must unregister a 

handset in order to register a new one.

Your base or charger may be too close. Move it as far away 
as possible.