HP ProLiant DL160 666282-B21 사용자 설명서
제품 코드
666282-B21
HP SmartMemory
New HP SmartMemory now provides additional protection for your servers. With HP Authentication it can verify that you have true HP
Qualified Memory in your HP ProLiant Gen8 server. With HP SmartMemory your new HP ProLiant server can take advantage of
additional Gen8 enhancements in performance, durability and future manageability support through HP Active Health System.
Qualified Memory in your HP ProLiant Gen8 server. With HP SmartMemory your new HP ProLiant server can take advantage of
additional Gen8 enhancements in performance, durability and future manageability support through HP Active Health System.
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
HP ProLiant DL160 Gen8
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
4GB (1x4GB) , 8GB (2 x 4GB) or 16GB(4 x 4GB) depending on model, DDR3-1333MHz Registered RDIMM memory
4GB (1x4GB) , 8GB (2 x 4GB) or 16GB(4 x 4GB) depending on model, DDR3-1333MHz Registered RDIMM memory
Maximum Memory
Up to 768GB
Up to 768GB
NOTE: Charts do not represent all possible memory configurations.
DDR3 memory population guidelines
NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
Some DIMM installation guidelines are summarized below:
For servers with twenty-four (24) memory slots:
There are four (4) channels per processor; eight (8) channels per server
There are three (3) DIMM slots for each memory channel; twenty-four (24) total slots
There are three (3) DIMM slots for each memory channel; twenty-four (24) total slots
White DIMM slots denote the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
When two processors are installed, balance the DIMMs across the two processors.
To maximize performance, balance the total memory capacity between all installed processors
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
When two processors are installed, balance the DIMMs across the two processors.
To maximize performance, balance the total memory capacity between all installed processors
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
Do not mix UDIMMs, RDIMMs or LRDIMMs
LR DIMMs are supported up to 3 DIMMs per channel.
DIMMs of different voltages (1.35V & 1.5V) may be mixed in any order
The system will power them at the higher voltage
DIMMs of different speed grades may be mixed in any order
LR DIMMs are supported up to 3 DIMMs per channel.
DIMMs of different voltages (1.35V & 1.5V) may be mixed in any order
The system will power them at the higher voltage
DIMMs of different speed grades may be mixed in any order
The system will select a common optimal speed
To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For
additional information, please see the HP SmartMemory QuickSpecs at:
additional information, please see the HP SmartMemory QuickSpecs at:
QuickSpecs
HP ProLiant DL160 Gen8
Memory
DA - 14282 Worldwide — Version 10 — September 24, 2012
Page 43