Cisco ONS-SI-622-L1-RF 데이터 시트
Data Sheet
© 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 11
The high-density MRC-12 card with its flexible optical rate and reaches helps consolidate many
network elements and significantly reduce the complexity of interworkings between the various
networks. Manual cabling by an onsite technician is replaced by electronic cross-connections
using the Cisco Transport Controller craft management system from anywhere with network
connectivity. This helps improve response times to circuit additions and changes.
With its flexibility, density, and wide selection of service modules, the Cisco ONS 15454 MSPP
supports a comprehensive mix of applications, allowing a single platform type to meet many
business requirements. These capabilities allow users to lower their operational costs by reducing
technician training to a smaller base of platform types, reducing sparing requirements, and
decreasing service turn-up time for improved revenues.
Key Features and Benefits
Table 1 outlines some of the key features and benefits of the MRC-12 card.
Table 1.
Features and Benefits
Feature
Benefits
Multiple-port design
Provides cost-effective services aggregation, expands flexibility to support multiple-
network hubbing architectures (ring and point-to-point), and frees shelf slots for
additional service cards.
network hubbing architectures (ring and point-to-point), and frees shelf slots for
additional service cards.
SFP module-based
More cost-effective sparing of SFP cards than fixed-card alternatives. Allows
common carrier card to support many user applications through plug-in devices
and simplifies support for system changes caused by network turnover.
common carrier card to support many user applications through plug-in devices
and simplifies support for system changes caused by network turnover.
Multiple-reach
Suitable for all metro applications between central offices, collocation offices, or
enterprise and campus facilities with span lengths from 2 km to 80 km.
enterprise and campus facilities with span lengths from 2 km to 80 km.
Provisionable J0 section/regenerator
section and J1 path trace support
section and J1 path trace support
Enhances network maintenance and troubleshooting activities.
Per port line/multiplex section and
section/regenerator section overhead
provisioning of data communications
channel (DCC)
section/regenerator section overhead
provisioning of data communications
channel (DCC)
Allows DCC connectivity from any network port, providing user flexibility.
Support for SDH tunneling over SONET
Allows transport for SDH terminal equipment over installed optical network.
User-defined automatic in-service (AINS)
of ports
of ports
Allows service port and path to be created awaiting valid signal without creating
invalid system alarms.
invalid system alarms.
Telcordia Technologies OSMINE
Support for TIRKS for both card and pluggable optics modules in card. GFDS for
slot management and dynamic inventory management. HESIG codes for each
supported service type.
slot management and dynamic inventory management. HESIG codes for each
supported service type.