Valcom V-1036C 전단

The 15-Watt Amplified Horn, Model V-1036C, shall be an FCC registered, weather-resistant, high efficiency reentrant type horn
with high frequency diffuser. It shall be equipped with an amplifier, externally accessible volume control. It shall include a
detachable base for wall or single, double or octagon electrical box mounting and omni-directional ball joint mounting bracket to
allow precise positioning in the vertical and horizontal planes with a single adjustment. An I-beam mounting clamp shall also be
provided. The FCC registration number shall be BAFUSA-69358-KX-N.

The frequency response shall by 225 Hz to 14 kHz. Dispersion shall be 120 horizontal and 90° vertical. Sound pressure level
shall be 121 dB measured at 4 feet (1.22 m) on axis with an input to the amplifier module being -10 dBm at 1 kHz.  Distortion
shall be less than 2.0% at rated output of 15 watts RMS. Output load shall be 8 ohms. Input impedance shall be 1000 ohms
nominal. The amplifier shall operate on a -24 Vdc nominal, positive ground power supply. Operating current shall be 900 mA at
-24 Vdc. Operating temperature shall be -4 to 131 °F (-20 to 55 °C). Operating humidity shall be 0-95% noncondensing.

The horn shall be constructed of high impact ABS plastic. The mounting base shall be constructed of LEXAN® an ultra high
impact material which is stronger and tougher than die casting. The finish shall be beige with brown accent. The I-beam
mounting clamp shall be constructed of zinc chromate plated steel.

Dimensions of the horn shall be 7.38" (18.75 cm) H x 10.0" (25.40 cm) W x 10.5" (26.67 cm) D. Shipping weight shall be
approximately 4.7 lbs (2.2 kg).

LEXAN

® Registered Trademark of General Electric Co.

Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of nor-

mal use and service for a period of one year from the date of shipment.  The obligation under this warranty shall be limited to the re-
placement, repair or refund of any such defective device within the warranty period, provided that:

1.  inspection by Valcom, Inc. indicates the validity of the claim,

2.  the defect is not the result of damage, misuse, or negligence after the original shipment,

3.  the product has not been in any way repaired by others and that factory sealed units are unopened.
    (A service charge plus parts and labor will be applied to units defaced or physically damaged).

4.  freight charges for the return of products to Valcom, Inc. are prepaid,

5.  all units “out of warranty” are subject to a service charge.  The service charge will cover minor repairs
    (major repairs will be subject to additional charges for parts and labor).

This warranty specifically excludes damage incurred in shipment.  In the event a product is received in damaged condition, the

carrier should be notified immediately.  Claims for such damage should be filed with the carrier involved in accordance with the F.O.B.
point.