TP-LINK TL-WA750RE 사용자 설명서
TL-WA750RE
150Mbps Universal WiFi Range Extender User Guide
z
LED Explanation:
Name
Status
Indication
On
A secure connection has been established.
Flashing TL-WA750RE is establishing a secure connection.
RE
Off
No connection is active.
Flashing The wireless function of TL-WA750RE is enabled.
Wireless
Off
The wireless function of TL-WA750RE is disabled.
On
TL-WA750RE is on.
Power
Off
TL-WA750RE is off.
On
A device is connected to the ETHERNET port, but there is no
activity.
activity.
Flashing A device is connected to the ETHERNET port, and is active.
Ethernet
Off
No device is connected to the ETHERNET port.
On(1~5) TL-WA750RE is connected to the router. More LEDs indicate a
better connection between TL-WA750RE and the router.
Flashing
TL-WA750RE is connected to the router, but isn’t connected to the
Internet.
Internet.
Signal
Strength
Off
TL-WA750RE isn't connected to the router.
Table 1-1
z
(RANGE EXTENDER/WPS): If your Wireless router or AP supports WPS or QSS
function, you can press the WPS or QSS button and then press the RANGE EXTENDER
button to establish a secure connection between the Wireless router (or AP) and the Range
Extender TL-WA750RE.
button to establish a secure connection between the Wireless router (or AP) and the Range
Extender TL-WA750RE.
z
RESET: This button is used to restore the Range Extender’s factory default settings.
There are two ways to reset the Range Extender’s factory defaults:
Method One: With the Range Extender powered on, use a pin to press and hold the RESET
button (about 8 seconds) until the System LED becomes quick-flash from slow-flash. And
then release the button and wait the Range Extender to reboot to its factory default settings.
button (about 8 seconds) until the System LED becomes quick-flash from slow-flash. And
then release the button and wait the Range Extender to reboot to its factory default settings.
Method Two: Restore the default settings from “System Tools > Factory Defaults” of the
Range Extender's Web-based management page.
Range Extender's Web-based management page.
z
ETHERNET: One 10/100Mbps RJ45 Ethernet port used to add wireless connectivity to an
Ethernet-enabled device such as Internet TV, DVR, Gaming console and so on. Please note
that this port is not allowed to be connected with router or AP.
that this port is not allowed to be connected with router or AP.
3