TP-LINK TL-WR 941 ND 사용자 설명서

TL-WR941ND

 

 

Figure 4-45    Access Control Rule Management 

¾

 

Enable Internet Access Control - Select the check box to enable the Internet Access 

Control function, so the Default Filter Policy can take effect.   

¾

 

Rule Name - Here displays the name of the rule and this name is unique.   

¾

 

Host - Here displays the host selected in the corresponding rule.   

¾

 

Target - Here displays the target selected in the corresponding rule.   

¾

 

Schedule - Here displays the schedule selected in the corresponding rule.   

¾

 

Action - Here displays the action the Router takes to deal with the packets. It could be Allow 

or Deny. Allow means that the Router permits the packets to go through the Router. Deny 

means that the Router rejects the packets to go through the Router.   

¾

 

Status - This field displays the status of the rule. Enabled means the rule will take effect, 

Disabled means the rule will not take effect.   

¾

 

Modify - Here you can edit or delete an existing rule.   

1. Click 

the 

Add New… button and the next screen will pop-up as shown in Figure 4-46. 

2.  Give a name (e.g. Rule_1) for the rule in the Rule Name field. 

3.  Select a host from the Host drop-down list or choose “Click Here To Add New Host List”. 

4.  Select a target from the Target drop-sown list or choose “Click Here To Add New Target 

List”. 

5.  Select a schedule from the Schedule  drop-down list or choose “Click Here To Add New 

Schedule”. 

-64-