TP-LINK TL-WR 941 ND 사용자 설명서

 

 

- 21 - 

 

Figure 4-4  the Network menu 

There are three submenus under the Network menu (shown in Figure 4-4): LAN, WAN and MAC 

Clone. Click any of them, and you will be able to configure the corresponding function.   

Choose menu “Network→LAN”, you can configure the IP parameters of the LAN on the screen 

as below. 

 

Figure 4-5  LAN 

¾

 

MAC Address - The physical address of the router, as seen from the LAN. The value can't 

be changed. 

¾

 

IP Address - Enter the IP address of your router or reset it in dotted-decimal notation 

(factory default: 192.168.1.1). 

¾

 

Subnet Mask - An address code that determines the size of the network. Normally use 

255.255.255.0 as the subnet mask.   

)

 

a.  If you change the IP Address of LAN, you must use the new IP Address to login the router.   
b.  If the new LAN IP Address you set is not in the same subnet,

  the IP Address pool of the 

DHCP server will change accordingly at the same time，while  the  Virtual  Server  and  DMZ 
Host will not take effect until they are re-configured. 

Choose menu “Network→WAN”, you can configure the IP parameters of the WAN on the screen 

below.