TP-LINK TL-WR 941 ND 사용자 설명서

 

 

- 39 - 

¾

 

IP Address - The IP Address of the PC providing the service application. 

¾

 

Protocol - The protocol used for this application, either TCP,  UDP, or All  (all protocols 

supported by the router). 

¾

 

Status - The status of this entry either Enabled or Disabled. 

1. Click 

the Add New button. (pop-up Figure 4-25) 

2.  Select the service you want to use from the Common Service Port list. If the Common 

Service Port list does not have the service that you want to use, type the number of the 

service port or service port range in the Service Port box. 

3.  Type the IP Address of the computer in the Server IP Address box.  

4.  Select the protocol used for this application, either TCP or UDP, or All. 

5. Select 

the 

Enable check box to enable the virtual server. 

6. Click 

the 

Save button.   

 

Figure 4-25    Add or Modify a Virtual Server Entry 

)

If your computer or server has more than one type of available service, please select another 

service, and enter the same IP Address for that computer or server. 

1. Click 

the 

Modify  in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   

3. Click 

the 

Save button. 

Click the Enable/ Disabled All button to make all entries enabled/ disabled. 

Click the Delete All button to delete all entries.