TP-LINK TL-WR 941 ND 사용자 설명서

 

 

- 49 - 

Choose menu “Security→MAC Address Filtering”, you can configure the MAC Address filtering 

rule in the next screen (shown in Figure 4-36). The MAC Address Filtering feature allows you to 

control access to the Internet by users on your local network based on their MAC addresses. 

 

Figure 4-36  MAC Address Filtering 

¾

  MAC Address - .This is the PC’S MAC address which is controlled by the rule. Its format is 

XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0E-AE-B0-00-0B. 

¾

  Description - This is the description about the PC, Fox example: John’s PC. 

¾

  Status - This field displays the status, Enabled means the rule is effective, Disabled means 

the rule is ineffective. 

)

Before adding a MAC Address Filtering entry, you should enable the Firewall and the MAC 

Address Filtering function first (shown in Figure 4-31). 

Fox example: If you want to block the PCs with MAC addresses 00-0A-EB-00-07-BE and 

00-0A-EB-00-07-5F to access the Internet, you can configure as follows. 

1.  Enable the “Firewall” and “MAC Address Filtering” on the Firewall screen (show in Figure 

4-31). And then specify the Default MAC Address Filtering Rule as "Deny these PCs with 

enabled rules to access the Internet". 

2. Click Add New…/Modify shown in Figure 4-36, you will see the following 

screen.