Transition Networks MIL-SM2401MAF 사용자 설명서
119
IP Address
User can configure the IP Settings and DHCP client function, than clicks
Apply
button.
After reset the IP address, you must reboot the switch.
1.
1.
DHCP Client: “Enable” is to get IP from DHCP server. “Disable” is opposite. The
DHCP client function only works if you haven't assigned a static IP address that
different than the switch default IP. Once the default IP has been changed the
DHCP will not effective and the switch will continue using the manually entered static
IP. If you have changed the switch to a static IP address, you can set the IP address
back to its default IP address or you can reset the switch back to factory default. And
then you can enable the DHCP client function to work.
DHCP client function only works if you haven't assigned a static IP address that
different than the switch default IP. Once the default IP has been changed the
DHCP will not effective and the switch will continue using the manually entered static
IP. If you have changed the switch to a static IP address, you can set the IP address
back to its default IP address or you can reset the switch back to factory default. And
then you can enable the DHCP client function to work.
2.
IP Address: assign the switch IP address. The default IP is 192.168.1.77
3.
Subnet Mask: assign the switch IP subnet mask.
4. Gateway: assign the switch gateway. The default value is 192.168.1.254
IP configuration interface
Switch Setting