Trendnet BRF114 사용자 설명서

Introduction 

5 

 

This button has two (2) functions: 
•  Reboot.  When pressed and released, the TW100-BRF114 will 

reboot (restart). 

•  Clear All Data.  This button can also be used to clear ALL data 

and restore ALL settings to the factory default values. 

To Clear All Data and restore the factory default values: 

1.  Power Off. 

2.  Hold the Reset Button down while you Power On. 

3.  Keep holding the Reset Button down for five (5) seconds, until 

the Red Status LED has flashed TWICE. 

4.  Release the Reset Button. The TW100-BRF114 is now using the 

factory default values. 

Connect the DSL or Cable Modem here. If your modem came with a 
cable, use the supplied cable. Otherwise, use a standard LAN cable. 

Use standard LAN cables (RJ45 connectors) to connect your PCs to 
these ports. 

Any LAN port on the TW100-BRF114 will automatically function as 
an "Uplink" port when required. Just connect any port to a normal 
port on the other hub, using a standard LAN cable. 

Connect the supplied power adapter here.