Trendnet TE100-P1U 사용자 설명서

Figure 11: Print Port Setup (Peer-to-peer Printing)

If your Print Server is not listed:

• Click the "Refresh" button.
• Check that both the Print Server and the printer are properly connected, and

powered on.

• Check that the Print Server has been configured. (Use the Setup Wizard on

the CD-ROM.)

• If using TCP/IP, try installing the NetBEUI protocol. Then try again.

2. Select the desired port on a Print Server, then click Next. A pop-up message will inform

you if the port has been created successfully.

If you see the following error message, either install Internet
Explorer 4 or later, or follow the procedure in the "Trouble
Shooting - Windows" section of Chapter 8.

Page 15