Trendnet TW-H6W1IR 사용자 설명서

다운로드
페이지 165
TW-H6W1IR ISDN Remote Router 
84 
Configuration and 
Management 
CUSeeMe and Diablo) require specific port number translations, 
access to a range of port numbers, or no port number translation at all. 
The router can be configured for these types of applications using the 
Configure NAPT for Special Ap[plication]s submenu which is 
further described below. 
As with NAT, defining static NAPT entries negates the security inherent 
in the NAPT process. However, only the specific port on the computer 
associated with the Static NAPT entry is accessible to users outside 
your network. In any case, whenever Static assignments are used, we 
highly recommend using alternative security measures such as filters 
and/or security features in the application software. 
Setting Local IP Addresses 
When implementing NAT and thus creating a private network that is 
isolated from the Internet, you can assign any IP addresses to host 
computers without problems. However, the Internet Assigned Numbers 
Authority (IANA) has reserved the following three blocks of IP 
Addresses specifically for private networks: 
Class 
Beginning Address 
Ending Address 
10.0.0.0 
10.255.255.255 
172.16.0.0 
172.31.255.255 
192.168.0.0 
192.168.255.255 
 
It is recommended that you choose local IP addresses for use with 
NAT from the private network IP addresses in the above list. For more 
information on address assignment, refer to RFC 1597, Address 
Allocation for Private Internets
 and RFC 1466, Guidelines for 
Management of IP Address Space