Troy-Bilt HYDROSTATIC LAWN TRACTOR - HORSE 769-06304 사용자 설명서

Your tractor’s transmission is equipped with a hydrostatic relief 

valve for occasions when it is necessary to move the tractor 

manually. Activating this valve forces the fluid in the transmission 

to bypass its normal route, allowing the rear tires to “freewheel.” 

To engage the hydrostatic relief valve, proceed as follows:

Locate the hydrostatic bypass rod in the rear of the tractor. 

1. 

See Fig. 5-2.

Pull the hydrostatic bypass rod outward, then down to lock 

2. 

it in place.

NOTE: The transmission will NOT engage when the hydrostatic 

bypass rod is pulled out. Return the rod to its normal position 

prior to operating the tractor.

Never attempt to move the tractor manually 

without first engaging the hydrostatic relief valve. Doing so will 

result in serious damage to the tractor’s transmission.

On some models, the lamps are ON whenever the tractor’s 

• 

engine is running. On other models, the lamps are ON 

whenever the ignition key is moved out of the STOP 

position.
On all models, the lamps turn OFF when the ignition key is 

• 

moved to the STOP position.