Troy-Bilt 429 사용자 설명서

다운로드
페이지 16
8
4
Operating 
Your Lawn 
Mower
Blade Control
The blade control is attached to the upper handle 
of the mower. Depress and squeeze it against the 
upper handle to operate the unit. Release it to stop 
engine and blade. 
WARNING: This blade control mechanism is 
a safety device. Never attempt to bypass its 
operations.
Cutting Height Adjustment Levers
One adjustment lever is located at each wheel and 
is used to adjust the cutting height. All four levers 
must be moved to the same position to ensure a 
uniform cut.
Recoil Starter
The recoil starter is attached to the right upper 
handle. Stand behind the unit, depress blade con-
trol, and pull the recoil starter rope to start the unit.
Gas and Oil Fill-Up 
Refer to Engine Manual for engine details.
1.  Check oil level and add oil if necessary. Follow engine 
manual for this. 
2.  Service the engine with gasoline as instructed in the 
engine manual.
WARNING: Use extreme care when handling 
gasoline. Gasoline is extremely flammable 
and the vapors are explosive. Never fuel the machine 
indoors or while the engine is hot or running. Extin-
guish cigarettes, cigars, pipes and other sources of 
ignition.
WARNING
The blade control 
mechanism is a safety 
device. Never attempt to 
bypass its operations.
Use extreme care when 
handling gasoline. 
Gasoline is extremely 
flammable and the vapors 
are explosive. Never
 fuel 
the machine indoors or 
while the engine is hot 
or running. Extinguish 
cigarettes, cigars, pipes 
and other sources of 
ignition.
Keep hands and feet 
away from the chute area 
on cutting deck. Refer to  
warning label on the unit.
Know Your Lawn Mower
Now that you have setup your lawn mower, its important to become acquainted with its controls and features.
Figure 4-1: The main components on the mower.
Cutting Height Adjustment 
Levers (one at each wheel)
Blade Control
Recoil Starter