Troy-Bilt Series 540 사용자 설명서

Now that you have set up your lawn mower for opera-
tion, read this section to become acquainted with its 
controls and features. This knowledge will allow you to 
use your new equipment to its fullest potential. 

The blade control is attached to the upper handle. 
Depress and squeeze it against the upper handle to 
operate the unit. Release it to stop engine and blade. 

One adjustment lever is located on each wheel and is 
used to adjust the cutting height. All four wheels must 
be at the same position to ensure a uniform cut.

The recoil starter is attached to the right upper handle. 
Stand behind the unit and pull the recoil starter rope to 
start the unit.

The mulch plug is used for mulching purposes. Instead of 
collecting the grass clippings in a grass catcher or using 
the side discharge chute, some mower models have the 
option of recirculating the clippings back to the lawn. This 
is called mulching.

The grass catcher, located at the rear of the mower, is 
used to bag the grass clippings for disposal at another 
site. Once the bag is full, it has to be removed from the 
mower and emptied before any further mowing.

1.  Check oil level and add oil if necessary. Follow engine 

owner’s manual for this. 

2.  Service the engine with gasoline as instructed in the 

engine owner’s manual. 

Never fuel the machine 

Figure 4-1: The major parts on the lawn mower.