Clarity INT9 사용자 설명서

Clarity - INT9 A/D converter

Using the INT9 card

3.2.2

Method Setup - Measurement

Fig. 11.

Method Setup - Measurement

External Start/Stop
Enables control from an external signal.

Note:

The Input used for an external Start from a

chromatograph can be set in the

System Configuration

dialog (see Fig. 4 on pg. 10).

Start Only
The external signal only starts an analysis.

Triggering the input will not influence the

acquisition in progress.
Start - Restart

The external signal terminates the analysis

in progress and at the same time starts a

new one. The first signal starts the analysis;

the second signal terminates it and at the

same time starts a new one - the so-called

continuous measurement.
Start - Stop

The external signal starts and stops an

analysis. The first signal starts the analysis;

the second signal stops it, etc.