JVC HR-J458E 사용자 설명서

1

2

3

4

5

6

7

8

9

0

2

4

1

3

TURN ON THE RECORDER

Press 

.

ACCESS MAIN MENU

SCREEN

Press MENU.

ACCESS MODE SET SCREEN

Press 

%fi to place the

pointer next to "MODE
SET", then press OK or    .

SELECT COLOUR SYSTEM

MODE

Press 

%fi to place the

pointer next to "COLOUR
SYSTEM", then press OK
or    to select the
appropriate colour system.

a- PAL/NTSC: To record PAL signals, or play back a

PAL or NTSC tape.

b- MESECAM: To record SECAM signals, or play back a

MESECAM tape.

● "AUTO SP

→

LP TIMER" appears only with the HR-

J458E.

RETURN TO NORMAL

SCREEN

Press MENU.

%

B. E. S. T.

=LP TIMER OFF

5∞] = 

%

5∞] = 

● Some TVs shrink the picture vertically and place black bars at

the top and bottom of the screen. This is not a malfunction on
the part of either the video recorder or the TV.

● The picture may roll up and down. This can be corrected

using the V-HOLD control found on some TVs. (This cannot
be corrected if the TV does not have a V-HOLD control.)

● The counter and tape remaining time readings will be

incorrect.

● During search, still, or frame-by-frame playback, the picture

will be distorted, and there may be a loss of colour.

● Depending on the type of TV, the top and bottom portions of

superimposed displays may be cut off during NTSC playback.

You can play back PAL, NTSC and MESECAM tapes, or record
PAL and SECAM* signals on this recorder. Follow the procedure
below to select the appropriate colour system.

* SECAM signals will be recorded as MESECAM on this recorder;

MESECAM is the designation for tapes with SECAM signals that have
been recorded on a MESECAM-compatible PAL video cassette
recorder.