JVC HR-J313EU 사용자 설명서

1

2

3

4

5

6

7

8

9

0

2

4

1

3

When you connect the recorder and your TV via fully-wired
21-pin SCART cable (

Z

 pg. 3), you can set the recorder's tuner

channels by downloading preset data from your TV instead of
using the Auto Set Up function (

Z

 pg. 4). After downloading is

completed, the recorder sets the clock and Guide Program
number automatically. For details, refer to the instruction
manual for your TV.

PERFORM PRESET DOWNLOAD

Press OK.

Press 

%fi to select "CH – –" and press OK or 

#

.

Press 

%fi to move the

highlight bar (pointer) to
"T-V LINK" and press OK
or 

#

.

Preset position on the display panel increases from
"CH1"; do NOT press any button on the recorder or
remote control until the display panel shows either
the display as illustrated on page 7 or "– –:– –".

● If "– –:– –" appears on the display panel, refer to page

7.

● If you are using the on-

screen display, the T-V
LINK screen will appear.
Then the GUIDE PROG
SET screen will appear
during Guide Program
number set.

● If you press any button

on the recorder or
remote control while
downloading is in
progress, it will be
interrupted.

SET VIDEO CHANNEL

Set the Video Channel to off manually. (

Z

 pg. 44)

5∞] = 

● In the area where no TV station transmits a PDC signal, the

recorder can perform neither auto clock set nor auto Guide
Program number set.

● If there is a power cut, or if you press 

 or MENU while

downloading or set up is in progress, it will be interrupted; be
sure to turn off the recorder power once and try again from the
beginning.

● Auto clock may not function properly depending on the

reception condition.

● When you perform T-V LINK function, be sure to use fully-

wired 21-pin SCART cable.

● On this recorder, the characters available for station’s name

(ID) are A–Z, 0–9, –, 

*

, + and   (space). Some downloaded

station’s name may differ from those of your TV (

Z pg. 39).

Perform steps 1 to 3 of "Auto Set Up" on page 4 and 5 before
continuing.

You can use this function only with the TV offering
T-V Link, etc.*

* Compatible with TVs offering T-V Link, EasyLink, Megalogic,

SMARTLINK, Q-Link, DATA LOGIC or NEXTVIEWLINK via fully-
wired 21-pin SCART cable. The degree of compatibility and
available functions may differ by system.