JVC HR-J672EK 사용자 설명서

B. E. S. T.

=LP TIMER OFF

5∞] = 

Set "L-2 SELECT" to the appropriate mode depending on the type of unit connected to the rear
panel AV2 (L-2) IN/DECODER connector of this recorder.

1

Press MENU to access the Main Menu screen.

2

Press 

%fi to move the highlight bar (pointer) to "MODE SET", then press OK or 

#

.

3

Press 

%fi to move the highlight bar (pointer) to "L-2 SELECT".

4

Press OK or 

#

 to select "L-2", "DECODER" or "SAT".

a–L-2

: To use this recorder as the recording deck with the player connected to the

AV2 (L-2) IN/DECODER connector, or to use the satellite receiver connected
to the AV2 (L-2) IN/DECODER connector.

b–DECODER : To use a decoder connected to the AV2 (L-2) IN/DECODER connector.
c–SAT

: To view a satellite programme with the TV set while the recorder is turned

off. (

Z

 pg. 26)

5

Press MENU to return to normal screen.

● If you have a satellite receiver or a decoder connected to the AV2 (L-2) IN/DECODER connec-

tor, be sure to set "L-2 SELECT" back to appropriate mode after editing.

● If you're not connecting a satellite receiver or a decoder to the AV2 (L-2) IN/DECODER con-

nector, leave "L-2 SELECT" set to "L-2".

● The default setting is "L-2"; if the recorder's memory backup has expired due to a power cut or

because the AC was removed from the recorder, "L-2" will be automatically selected when the
power is restored to the recorder. If you are using a satellite receiver or a decoder, be sure to
set "L-2 SELECT" back to appropriate mode.

● When "L-2 SELECT" is set to "SAT", "SAT" appears on screen or display panel instead of "L-2" or

"L2".

5∞] =