JVC HR-J585EU 사용자 설명서

다운로드
페이지 16
January 30, 2002 8:52 am
Page 4
— 4 —
Master Page: Right
On-screen display
If you press 
(OK) on the remote control when “OSD” is set to 
“ON” (
5), you can see the current recorder status on the 
screen. The indications except the clock or time counter 
disappears in about 5 seconds. To clear the on-screen display 
completely, press 
(OK) again.
The indications are not recorded even if the recorder is in the 
recording mode.
A Channel and auxiliary input
B Clock*
C Tape position*
D Time counter*
E Current day/month/year
F Tape speed
G Recorder operation mode
* Each time you press 
 (OK), the display shows clock or tape position and 
time counter alternatively.
Main Menu
You can perform various operations or change various mode 
settings on the Main Menu Screen.
● Turn on the recorder and the TV, and set your TV to its AV mode 
or video channel.
● The procedure shows how to set “OSD” to “ON”.
A
Access Main Menu screen
Press MENU. Press w e to select the icon 
“OSD”, then press OK.
● If you select the icon A  to D, follow the 
each setting procedure.
● If you select the icon E to K, go to 
step
2
2
2
2.
B
Change setting
Press rt to set to “ON”, then press w or 
e.
C
Return to normal screen
Press MENU.
*The default setting is bold in the following table.
On-screen 
display
Description
PLAY
appears when you playback.
REW
appears during rewinding, or blinks during 
rewinding with Rewind Power Off function. 
(
10)
FF
appears during fast-forwarding.
EZ REPEAT
appears during Ez repeat playback. (
10)
EJECT
appears when you eject the cassette.
STOP
appears when you stop playback or recording.
RECORD
appears during recording.
RECP
appears in the record pause mode.
SAFE
appears when the recorder enters in child lock 
mode, or any buttons on the recorder are pressed 
during child lock mode. (
15)
Icon
Description
REC
Select this icon to timer-record the programme. 
(
12)
PR SET
Select this icon to perform Manual Channel Set. 
(
8, 9)
ACMS
Select this icon to perform Auto Channel Set. 
(
7) Auto Channel Set automatically assigns 
all receivable stations in your area.
TIME 
DATE
Select this icon to set clock. (
7)
SYSTEM AUTO / PAL / MESECAM 
You can play back PAL, NTSC and MESECAM 
tapes, or record PAL and SECAM* signals on this 
recorder. Select the appropriate colour system.
* SECAM signals will be recorded as MESECAM on 
this recorder; MESECAM is the designation for tapes 
with SECAM signals that have been recorded on a 
MESECAM-compatible PAL video cassette recorder.
AUTO
: Normally select this. The appropriate 
colour system is selected automatically 
depending on the playback or recording signals.
If “AUTO” does not work correctly, set the 
following mode manually.
PAL
: To record PAL signals, or playback a PAL.
MESECAM
: To record SECAM signals, or play 
back a MESECAM tape.
NOTES:
About NTSC Playback
● Some TVs shrink the picture vertically and 
place black bars at the top and bottom of the 
screen, or cut off the top and bottom portions 
of superimposed displays. This is not a 
malfunction.
● The picture may roll up and down. This can 
be corrected if your TV has the V-HOLD 
control function.
● The counter and tape remaining time readings 
will be incorrect.
● During search, still, or frame-by-frame 
playback, the picture will be distorted, and 
there may be a loss of colour.
OSD
HR-J585_285EU-001EN.fm  Page 4  Wednesday, January 30, 2002  8:54 AM