JVC HR-S5900AM 사용자 설명서
28
EN
G-CODE/SHOWVIEW NO.
1 2 3 4 5 6 7 8
[0 – 9]
=
[ ] : DELETE
[PROG] : EXIT
[PROG] : EXIT
ACCESS G-CODE/
SHOWVIEW NO. SCREEN
1
Press PROG.
ENTER G-CODE NUMBER
2
Press the NUMBER keys to
enter the G-
enter the G-
CODE
number
of a programme you wish
to record.
to record.
● If you make a mistake,
press and input the
correct number.
correct number.
ACCESS G-CODE
PROGRAMME SCREEN
3
Press OK, and the G-
CODE
Programme screen
appears. (If you're just
starting out, "P1" appears.)
appears. (If you're just
starting out, "P1" appears.)
IMPORTANT
Make sure the channel position number you wish
to record is displayed; if not, see "G-
to record is displayed; if not, see "G-
CODE/
S
HOW
V
IEW
System Setup" on page 26 and set the Guide
Program number for that G-
Program number for that G-
CODE
number correctly.
● If the number you entered is invalid, "ERROR" appears
on the screen. Press and input a valid G-
CODE
number.
● If the "G-CODE/SHOWVIEW SETUP" screen appears,
see "ATTENTION – Regarding Guide Program
Number Set" on page 29.
Number Set" on page 29.
SET TAPE SPEED
4
Press SP/LP/EP (
) to set the tape speed.
– P1 –
NO. 123456789
START
STOP
21:00
=
22:00
SP
DATE
TV PROG
25.04
1
: OK
[1]: TITLE
G-
CODE
™/S
HOW
V
IEW
™
Timer
Programming
Before performing G-
CODE/
S
HOW
V
IEW
Timer Programming:
● Be sure to read "G-
CODE/
S
HOW
V
IEW
System Setup" (
pg. 26).
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the VIDEO channel (or AV
mode).
● Select the appropriate colour system (
pg. 52).
With the G-
CODE
system
, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your recorder is able to recognise.
code number which your recorder is able to recognise.
TIMER RECORDING (cont.)
G-CODE/SHOWVIEW NO.
[0 – 9]
=
[+/–] : EXPRESS PROGRAMING
[PROG] : EXIT
[PROG] : EXIT
Remember, the clock must be set before you can
programme the timer (
programme the timer (
pg. 12).
INFORMATION
G-
CODE
and S
HOW
V
IEW
are different trademarks used to
represent the same easy recording feature, but only the
term G-
term G-
CODE
system will be used in the instructions. If you
use the S
HOW
V
IEW
system, follow the same instructions
listed for the G-
CODE
system.
OK
NUMBER
SP/LP/EP
PROG
HR-S5900/5990AM-EN26-46
5/9/02, 4:31 PM
28