JVC HR-J781EU 사용자 설명서
Masterpage:Left
18
EN
PLAYBACK (cont.)
Variable Speed Search
(including Slow Motion)
(including Slow Motion)
During playback, turn the JOG dial to the right for
forward variable-speed search, or to the left for reverse
variable-speed search.
forward variable-speed search, or to the left for reverse
variable-speed search.
OR
During playback, press
w
or
e
repeatedly.
● Each time you press
w
or
e
or each time the JOG dial passes a
click position, the playback speed changes. To decrease the
speed during picture search, press the opposite direction
button repeatedly or turn the dial in the opposite direction.
speed during picture search, press the opposite direction
button repeatedly or turn the dial in the opposite direction.
● During still picture, press and hold
e
to start forward (or
w
to
start reverse) slow motion playback. When you release the
button, still picture resumes. During still picture, holding
button, still picture resumes. During still picture, holding
9
for
more than 2 seconds also starts forward slow motion playback.
If you press
If you press
9
again, still picture resumes.
Manual Tracking
Your video recorder is equipped with automatic tracking control.
During playback, you can override this and adjust the tracking
manually by pressing the PR buttons.
During playback, you can override this and adjust the tracking
manually by pressing the PR buttons.
1
Override automatic tracking.
Press
p
on the remote control.
2
Adjust the tracking manually.
Press PR + or –.
● Press
p
again to return to automatic tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
tracking mode automatically.
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
Timer mode is disengaged.
Activate Instant ReView.
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
● The front display panel tells you how many programmes have
been timer-recorded. If you have, for example, 3 programmes,
the Instant REVIEW indicator and “3” blink. To watch the first
of the 3 programmes, press REVIEW three times. The recorder
searches and begins playback automatically. You can access a
programme as far as 9 index codes away from the current tape
position.
the Instant REVIEW indicator and “3” blink. To watch the first
of the 3 programmes, press REVIEW three times. The recorder
searches and begins playback automatically. You can access a
programme as far as 9 index codes away from the current tape
position.
● The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Programme
Recording (
Recording (
墌
pg. 31).
To resume normal playback, press
4
.
HRJ780EU1.fm Page 18 Tuesday, December 19, 2000 10:16 AM