JVC HR-S8965EK 사용자 설명서
advanced features
45
Satellite Receiver
Control Settings
Control Settings
The following procedure is required if you receive satellite channels through
a satellite receiver. Around 20 seconds before the VIDEO Plus+ timer record-
ing or Manual timer recording starts, the VCR sets its input mode to L-2 and
automatically switches the satellite receiver’s channels using the provided
Satellite Controller.
a satellite receiver. Around 20 seconds before the VIDEO Plus+ timer record-
ing or Manual timer recording starts, the VCR sets its input mode to L-2 and
automatically switches the satellite receiver’s channels using the provided
Satellite Controller.
Installing Satellite Controller
situate satellite controller
Place
the Satellite Controller so that the path
between its transmitter and the satellite
receiver’s remote sensor is unobstructed.
between its transmitter and the satellite
receiver’s remote sensor is unobstructed.
attach satellite controller
Fix
securely using the adhesive strip at-
tached on the back of the Satellite
Controller.
tached on the back of the Satellite
Controller.
connect up
Be sure to connect the
recorder’s
AV2 (L-2) IN/DECODER
connector to the satellite receiver’s 21-
pin SCART connector.
pin SCART connector.
note
When connecting your satellite
receiver, refer to its instruction manual.
connect satellite controller to
vcr
Connect the Satellite Controller to
the
SAT CONTROL
connector on the rear
panel.
Satellite Receiver
IN/OUT
ENTREE/SORTIE
ENTREE/SORTIE
AV1(L-1)
IN/DECODER
ENTREE/DECODEUR
ENTREE/DECODEUR
PAUSE
TELEC.
TELEC.
SORTIE
RF OUT
RF OUT
ANT. IN
ENTREE
ENTREE
OUT
SORTIE
SAT
CONTROL
SAT
CTL
CONTROL
SAT
CTL
AV2(L-2)
OUT
SORTE
VIDEO
L
R
ANTENNE
DECODER
VCR
TV
Satellite Receiver
Satellite Controller
(suggested locations)
Your VCR
Satellite Controller
Your VCR
Transmitter
*DECODER function is not available in the UK.
HR-S8965EK-EN/p31-54
4/19/03, 01:15 PM
45